ScandAll PRO Update Software

ScandAll PRO V1.7 Update

This update should be applied to the ScandAll PRO V1.0 to V1.7 including Setup CD/DVD for fi scanners. In addition, this update can be also applied if the update pack, which is separately provided for each version, has been already applied.

Modifications

V1.7 Update3 (V1.7 Update2 -> V1.7 Update3)

• The following modification has been made:
  
  • Internet Explorer 8 support
• The following malfunctions have been corrected:
  
  • From the second batch scan onward, the filename's page counter value is one count larger than expected.
  • An error occurs when initiating file uploads via the linking function of SharePoint® Server, causing uploads to fail, and the error message, "SA06415E The specified folder cannot be accessed" to appear.
  • An error occurs when [Zone OCR] is initiated after opening a 1200dpi image and setting the Zone OCR detection area, causing error message "SA09999E Program malfunctioning" to appear.
  • When Zone OCR is specified to file name and barcode-based job separation function is enabled, files are saved under the same file name if they are separated into batches using the same bar code.
  • In scanner models fi-5900C and fi-4860C2 which are equipped with the pre-imprinter function, an error occurs when the page counter is specified for [Name Rule] and "Linking up with Imprinter" is enabled, causing the error message "Anomaly in the command for communicating with the scanner." to appear.
  • The scanning setting of ISIS/VRS driver does not change when the additional scanning is performed from the "Page-Append/Insert/Replace-Scan" menu.
  • When the taskbar is positioned to the top or left of the ScanAll PRO window and the program is restarted, the window appears slightly higher or more to the left than when the application was last closed.
  • The dialog box and a few application windows do not display on the foreground of the Windows desktop during FTP server linkage or web parts processing.

V1.7 Update2 (V1.7 Update -> V1.7 Update2)

• The following improvements have been made:
  
  • The number of digits included in the document counter / page counter has been increased from 4 digits to 8 digits.
  • Imprinters can now print up to 8 digits of information.
• The following malfunctions have been corrected:
  
  • The TWAIN driver error message that used to appear when setting "/NOERR" parameters, while starting up ScandAll PRO, no longer appears.
  • Updated scanners will no longer stop scanning while saving images in 256 color PDF formats after 1 of the messages "SA01032E" or "SA01041E" are displayed.
  • Barcode job separation related problems that used to occur when a barcode located outside of the specified reading area is mistakenly recognized will no longer occur.
  • The problem where PDF files could not be stored into a network folder after a message "SA02999E" appears will no longer occur.

V1.7 Update (V1.7 -> V1.7 Update)

• Windows Server™ 2008 is supported.
• The following malfunctions have been corrected:
  
  • Error occurs if the drive which is used to save the data in PDF file format is different from the drive in which the data was temporary stored.
  • TIFF file or PDF file consisted of the multiple pages which is created by using the barcode separator may not be saved correctly.

V1.7 (V1.6 -> V1.7)

• Zone OCR is supported.
• Automatic Deskew for Russian language is supported.
• Virtual scan in duplex mode with Simplex-scan model (fi-6750S) is supported.

V1.6 (V1.5.1 / V1.5.2 -> V1.6)

• The function to link to Microsoft® Office SharePoint® Server/Microsoft® Office Live is now supported by using "Scan to Microsoft SharePoint"^(Note1).

V1.5.1 (V1.5 -> V1.5.1)

• The display mode by magnifier is supported.
• Portuguese is supported.
• The error, in which ScandAll PRO may terminate unexpectedly when scanning the document with Kofax VRS, has been corrected.

V1.5 (V1.0 -> V1.5)

• The Job separation function is supported by using barcode and patch code sheet.
• Orientation Correction Filter is supported.

Operating Procedures

Log in as a user with "Administrator" privileges.

1. Download ScandAll PRO V1.7 Update3 （SAPV17VUP3.exe） to the hard disk.
   Note: The downloaded file need to be unzipped by the user. Double ckick the file to unzip.
2. The folder, SAPV17VUP3 will be created in the same foler where the downloaded file is stored, and the resource for the update is distributed under the created SAPV17VUP3 folder.
   
   • For updating ScandAll PRO
     ⇒ Double click on the downloaded ScandAllPRO.exe
   • For updating ScandAll PRO SharePoint Server
     ⇒ Double click on the downloaded ScandAllPROSrv.exe
     
     How to confirm the ScandAll PRO update

• Now that you have completed updating your ScandAll PRO V1.7 Update3, please refer to README prior to activating it.

ScandAll PRO Lite V1.0 Update

This update should be applied to the ScandAll PRO Lite V1.0, the Setup CD bundled with fi-60F scanners.

Modifications

1. ScandAll PRO Lite is supported in Windows Server™ 2008.
2. ScandAll PRO SharePoint Server, that is installed on PC compatible with Microsoft® Office SharePoint® Server, is supported in Windows Server™ 2008.

Operating Procedures

Log in as a user with "Administrator" privileges.

• Now that you have completed updating your ScandAll PRO Lite V1.0 Update1, please refer to README prior to activating it.