Skip to main content



ScandAll PRO software change history

V2.0.7 Update Pack (Changes from V2.0.5 to V2.0.7)

Added Functions/improvements:

  1. The following OS are supported.
    ScsandAll PRO works as a desktop application with the following OS.
    • Windows® 8
    • Windows® 8 Pro
    • Windows® 8 Enterprises
    • Windows Server® 2012 Standard

      Note for Windows® 8 / Windows Server® 2012:
    • The TWAIN or ISIS driver needs to be updated. Download and install the driver that applies to the OS you are using.
    • Use Internet Explorer for desktop application if the Web parts are performed.
    • The installation of the Scan to Microsoft SharePoint may fail when .Net Framework 3.5 is not installed. Install .NET Framework 3.5 prior to the Scan to Microsoft SharePoint installation.

Corrected issues:

  1. Incorrect images were output when Split Image was performed via flatbed with ISIS driver.
  2. “LF code” is no longer added to the result of Zone OCR.
  3. The same page number is printed on all pages when the page number is printed with imprinter in the process of scanning as a multi-page file type.

V2.0.5 Update Pack (Changes from V2.0.3 to V2.0.5)

Added Functions/improvements:

  1. Two size types of the patch code sheet (A3 and DoubleLetter) are added.
    (They are located in the [Patch Code] folder under [Fujitsu ScandAll PRO] after Update Pack is installed.)
    - Job Separation (A3)
    - Job Separation (DoubleLetter)
  2. The following new options are added for [Name Rule] in the [Profile Editor] dialog box.
    1. "Reset to initial value after each scan" can be set under Document Counter and Page Counter.
    2. The filename can be edited at the start of scanning, or during file save. The [Edit File Name] dialog box appears at the start of scanning, or during file save when any or all of the following new options are set.
      a) "Optional character string" for Settings applied in the [Name Rule] dialog box
      b) The checkbox next to "Edit at file saving" under Document Counter
      c) The checkbox next to "Edit at file saving" under Page Counter

Corrected issues:

  1. “Profile Exporter”, “Profile Importer” or “ScandAll PRO ScanSnap mode Add-in” terminated abnormally under specific conditions.
  2. The acceptable range of bar distortion is relaxed for the One-dimensional Barcode detection. The content regarding the conditions for detecting one-dimensional barcodes is added to the Help menu.
  3. A malfunction occurred when scanning under the condition that only the reserved device name of Windows (e.g. COM1 etc.) was specified as the file name.
  4. The following inappropriate message appeared when trying to close the file after marking thumbnails.
  5. The following inappropriate message appeared when the custom settings of TWAIN driver were corrupt.
  6. The recognized string was output including the linefeed code at the end when performing the Zone OCR.

V2.0.3 Update Pack (Changes from V2.0.1, v2.0.2 to V2.0.3)

Corrected issues:

  1. After adjusting the date and time settings on the PC, the OCR function did not work properly.
  2. When launching ScandAll PRO from command line with the scanner turned off, the same TWAIN message appeared twice, and then ScandAll PRO becomes available with the message remaining.
  3. When scanning with the error message saying "TWAIN driver is used by another application" appeared, and the application froze.
  4. Once the part of the specified area for Barcode recognition or Zone OCR is out of a scanned sheet, Barcode recognition and Zone OCR stopped operating.
  5. After deselecting "Display scanned images immediately after scanning" and then scanning many pages, an insufficient memory error occurs and scanning terminates.