Carrier Grade Blade Server
UB300
UB300/NGN Platform System advantages
“UB300/NGN Platform System” can shorten development time of a system which an NGN service supplier will need. “UB300/NGN
Platform System” is the collective system to supply servers which can provide progressive secure network and performance for
new coming NGN, and an environment which can apply the server group for long-term stability.
Hardware is based on Advanced TCA standard which is the industry specification for the next generation of carrier grade communication
equipment. And the system consists of Carrier Grade Linux as the OS, and high performance / high availability middleware “UB300/NGN
Service middleware” that is tuned up exclusively for this system.
Server Blade S
RTM (mount with Server blade S, HDD loaded)
Features of UB300/NGN Platform System
Remarkable multi-tasking & Real time operation guaranteeing response performance even during high traffic conditions
- Thread switching performance improved drastically, through implementing real time scheduler at the same level as telecommunication system on middleware, by 2.6 times the system performance measured under standard Fujitsu measurement.
High availability operation at the same level as telecommunication systems
- Process multiplexing to minimize influence of service addition and system fault.
- The partial restart function that initializes only specific programs on a maintenance incident.
- Various redundant operations represented by hot-standby methods (１ plus １, N plus １), load balance method, and so on.
- Super-high-speed trouble detection / switching of either software trouble or hardware trouble.
- Detailed trouble information collection and management to an operator, for quick trouble analysis.
- Hot swap maintenance both for server blade and program.
- Latest hardware system based on an AdvancedTCA standard, supporting central office environment such as -48Vdc/NEBS.
Open interface cooperating various networks and systems
- Supporting SOAP, CORBA for communication between servers
Low power & long life support
- A power-saving design with max 40% power consumption deduction over conventional systems.
- The long life support with a min-5 year product supply after a product launch.
Supporting of existing server system asset
- Supports a wide-range of existing software porting.
UB300 Blade Server Specifications
- Electrical power saving server blade : Max. 230W
- Available in various environment : 5-40 degrees Celsius, Humidity 5%~85%
- High performance 2WAY / Dualcore Server Blade : SPECint2000 80 or more (with UB300 server blade S loaded)
| Model | UB300 Server Blade S(4G) : FCUB30SVD RTM:FCUB-RTM or FCUB-RTMF |
UB300 Server BladeS(8G) : FCUB30SVE RTM:FCUB-RTM or FCUB-RTMF |
|
| CPU | Dual core Intel® Xeon® Processor LV 2.13GHz | ||
| No. of processors | 2 | ||
| 2nd cache memory or L2 cache memory | 4MB | ||
| System Bus(FSB) | 1066MHz | ||
| Chip set | Intel® 5000P+6321ESB | ||
| Main memory | 4GB (1GB ECC DDR2 FBDIMM×4) |
8GB (2GB ECC DDR2 FBDIMM×4) |
|
| HDD | 73GB (2.5 SAS 10000rpm) : Loaded to RTM side | ||
| Performance (SPECint2000) | 80 | ||
| External Storage | Fibre channel (MAX:4Gbps) x 2[*1], SAS[*2] x 4 | ||
| LAN Interface | Inside | 1000BASE-T x 2 (each port connects to switch blade through chassis) | |
| Outside | 1000BASE-T x 4 (Connect from "back Blade x 4" or "front Blade x 2 + back Blade x 2") | ||
| Port for management | Serial x 1port, USB x 2ports | ||
| Expand slot | AMC[*3] x 1 | ||
| Power consumption | Max. 230W | ||
| Calorific Power | 828kJ/h | ||
| Energy consumption efficiency | 0.002(category b) | ||
| W x D x H (mm) | UB300 Server blade S : 30.48 x 280 x 350.93 (excluding prongs), RTM : 30.48 x 70 x 350.93 (excluding prongs) | ||
| Weight | UB300 Server blade S:3.7kg, RTM:0.9kg | ||
| Environment | Red Hat Enterprise Linux 4.0ES | ||
(*1)In case connected to FCUB-RTMF
(*2)Serial Attached SCSI
(*3)Advanced Mezzanine Card
Specifications are subject to change without notice.
