Debugger Setup Trouble Shoot
F2MC-16LX Family
Setup Check Sheet for MB2147-01 and SOFTUNE
Please refer to the following for the trouble shoot of the debugger setup.
Please confirm whether the setup of the MB2147-01 emulator and the SOFTUNE debugger can be corrected before the inquiry.
Please see a pertinent item of the check sheet when emulator/debugger doesn't start and it malfunctions or operation is unstable.
When such an Error Message comes out by debugger SOFTUNE...
[Check Sheet for Emulator MB2147-01]
| E01
|
Are all the connections completed?
|
Confirmation |
| E02
|
Is the RS-232C cable 9pin-9pin crossing cable?
(A straight cable cannot be connected.)
|
Confirmation |
| E03
|
Is evaluation MCU(MB90Vxxx) mounted on the adaptor board?
|
Confirmation |
| E04
|
Is the power supply of evaluation MCU supplied from the user system side?
|
Confirmation |
| E05
|
Are a dip switch and a short pin in the adaptor board set?
(Dip switch SW1 and SW2 are always turned off.)
|
Setting of SW3
|
Confirmation |
|
Setting of S1
|
Confirmation |
|
Setting of S2
|
Confirmation |
| E06
|
Is the Xtal mounted on the adaptor board?
|
Confirmation |
| E07
|
Is MOD terminal in the user system correct?
|
Confirmation |
[Check Sheet for Debugger SOFTUNE]
| S01
|
Was the system requirements of the emulator debugger set?
|
Confirmation |
| S02
|
Has the model of the emulator been correctly selected?
|
Confirmation |
| S03
|
Was the monitor program of the emulator loaded?
|
Confirmation |
| S04
|
Is setting connected interface between the emulator and PC correct?
|
USB
|
Confirmation |
|
RS-232C
|
Confirmation |
|
LAN
|
Confirmation |
| S05
|
Has MCU used been selected by setting the project of the workbench?
|
Confirmation |
| S06
|
When sample I/O register file is used, is include correctly done?
|
Confirmation |
