MCR3230AP Specifications
Obsolete product information
| Model name | MCR3230AP | ||||||
|---|---|---|---|---|---|---|---|
| Storage Capacity by Disk(1) | 2.3GB | 1.3GB | 640MB | 540MB | 230MB | 128MB | |
| Sector Capacity | 2,048 Byte | 512 Byte | |||||
| Drive Data Transfer Rate | Max | 4.70 - 8.39 MB/s (6.26 - 8.39 MB/s)(2) |
4.41 - 7.54 MB/s (5.23 - 7.54 MB/s)(2) |
3.94 - 6.56 MB/s | 3.95 - 6.64 MB/s | 2.21 - 3.53 MB/s | 1.84 MB/s |
| Write | 1.16 - 2.07 MB/s (1.55 - 2.07 MB/s)(2) |
1.12 - 1.91 MB/s (1.33 - 1.91 MB/s)(2) |
1.04 - 1.73 MB/s | 0.87 - 1.46 MB/s | 0.52 - 0.83 MB/s | 0.43 MB/s | |
| Read | 3.48 - 6.21 MB/s (4.64 - 6.21 MB/s)(2) |
3.35 - 5.73 MB/s (3.98 - 5.73 MB/s)(2) |
3.12 - 5.20 MB/s | 2.60 - 4.37 MB/s | 1.56 - 2.50 MB/s | 1.30 MB/s | |
| ATAPI Interface Data transfer Rate |
16.6 MB/s (PIO mode 4, DMA mode2) , 33.3 MB/s (Ultra DMA mode2) | ||||||
| Seek Time (typ.) | 23 ms | ||||||
| Average Latency Time | 8.2 ms (7.3 ms, 6.2 ms)(2) |
7.3 ms (6.2 ms)(2) |
4.9 ms | ||||
| Rotational Speed (typ.) | 3,640 min-1 (rpm) (4,094 min-1 (rpm), 4,853min-1 (rpm))(2) |
4,094 min-1 (rpm) (4,853 min-1 (rpm))(2) |
6,094 min-1 (rpm) | ||||
| Load Time (typ.) | 10 s | 10 s | 8 s | ||||
| Unload Time (typ.) | 4 s | ||||||
| Interface | ATAPI | ||||||
| Buffer Size(3) | 7,600 KB | ||||||
| Power Requirements | +5 V DC+/-5 % | ||||||
| Dimensions (W×D×H) | 101.6 mm x 150.0 mm x 25.4 mm (with bezel) | ||||||
| Weight | 480 g (with bezel) | ||||||
| Power Consumption (typ.)(4) |
Ready | 4.0 W | |||||
| Random W/R(5) | 5.1 W | ||||||
| Standby mode | 0.7 W | ||||||
| Ambient temperature | Operating | 5 to 45 degrees C, 10 to 85 % | |||||
| Vibration | Operating | 3.9 m/s2 (0.4 G) (5-500 Hz) | |||||
| Non-operating | 9.8 m/s2 (1.0 G) (5-500 Hz) | ||||||
| Shock | Operating | 19.6 m/s2 (2.0 G) | |||||
| Non-operating | 49 m/s2 (5.0 G) | ||||||
- 1 GB, MB:
- Storage Capacity by disk defines 1 gigabyte (GB) as 1,000,000,000 bytes and 1 megabyte (MB) as 1,000,000 bytes.
Accessible capacity will be less and actual capacity depends on the operating environment and formatting. - 2 ZCLV:
- Zone Constant Linear Velocity enabled case.
- 3 KB:
- The Buffer size defines 1 kilobyte (KB) as 1,024 bytes.
Small portion of buffer memory is used for drive firmware control. - 4 Typ.:
- typical
- 5 W/R:
- Write and Read
