M263 S Series Jumper Setting
Obsolete product information
M2634S, M2635S, M2636S, M2637S
PCA Layout
All configurations marked * are default settings.
Set SCSI ID
| JMP7 | JMP6 | JMP5 | ID |
|---|---|---|---|
| OPEN | OPEN | OPEN | 0 |
| OPEN | OPEN | SHORT | 1 |
| OPEN | SHORT | OPEN | 2 |
| OPEN | SHORT | SHORT | 3 |
| SHORT | OPEN | OPEN | 4 |
| SHORT | OPEN | SHORT | 5 |
| SHORT | SHORT | OPEN | 6 |
| SHORT * | SHORT * | SHORT * | 7 |
The drive is shipped from the factory with the SCSI ID set to 7.
This provides the drive with enough shorting straps for any ID.
It must be remembered though that the host adapter normally takes ID 7 with all peripheral devices using IDs 0 - 6.
Other Functions
- JMP4
SHORT * Spin up at power on
OPEN Spin via START/STOP UNIT command - JMP3
SHORT * SCSI parity enabled
OPEN SCSI parity disabled - JMP2
SHORT * UNIT ATTENTION enabled
OPEN UNIT ATTENTION disabled - JMP1
SHORT * SCSI level: Common Command Set
OPEN SCSI level: SCSI-2
