FUJITSU PCI GigabitEthernet 3.0 Update2 / 4.0
"FUJITSU PCI GigabitEthernet 3.0 Update2 / 4.0" is a GigabitEthernet card, Quad GigabitEthernet card driver when using
with Solaris™ 10 Operating System.
Please refer to Notes below.
| Updated | |
|---|---|
| FUJITSU PCI GigabitEthernet 3.0 Update2 / 4.0 | April 16, 2008 |
| FUJITSU PCI GigabitEthernet 3.0 Update 1 | May 29, 2007 |
Operating Environment
Be sure to confirm the installed operating environment before using this driver.
| Operating Environment | Hardware | |
|---|---|---|
 Server Model
|
System Requirements
|
Dual GigabitEthernet Card
Quad GigabitEthernet Card
|
* You cannot install both FUJITSU PCI GigabitEthernet 3.0 Update2 and FUJITSU PCI GigabitEthernet 4.0 on a same system.
Please choose one of the two products according to your environment and install it.
For more information, please refer to "FUJITSU PCI GigabitEthernet 3.0 Update2 / 4.0 Installation Guide".
Each driver can to be installed on a system having the following OS version number respectively.
FUJITSU PCI GigabitEthernet 3.0 Update2 / Solaris 10 (11/06 or later)
FUJITSU PCI GigabitEthernet 4.0 / Solaris 10 (8/07 or later)
Products manual
The following driver manuals provide information on functions, revisions and upgrades.
- PDF FUJITSU PCI GigabitEthernet 3.0 Update2 / 4.0 Update Information ［293KB]
- PDF FUJITSU PCI GigabitEthernet 3.0 Update2 / 4.0 INSTALLATION GUIDE [136KB]
- PDF FUJITSU PCI GigabitEthernet 3.0 Update2 / 4.0 User's Guide [3,785KB]
- PDF Install Server Build I/O device driver [229KB]
Notes
- Installation
- To install the driver, use the installer which is attached to the driver.
Do not use the pkgadd (1M) command.
- To install the driver, use the installer which is attached to the driver.
- Patches
- Please apply the latest patches after installing this driver.
The patches are available at "Recommended & Security Patches" webpage.
Regarding what patches you should apply, please refer to the Installation Guide.
- Please apply the latest patches after installing this driver.
| Driver | FUJITSU PCI GigabitEthernet 3.0 Update2 |
| Patch-ID | FPatch-ID：914568 (FJSVGID 3.0 : FUJITSU PCI GigabitEthernet 3.0 patch) |
| Bundled Patch | 914568-05 has been applied to this driver. |
| Driver | FUJITSU PCI GigabitEthernet 4.0 |
| Patch-ID | No patches exist. (As of April, 2008) |
| Bundled Patch | No bundled patches exist. |
3. Priority Order of Instance Number of GigabitEthernet Card
Instance number allocated to a device node on a new additional GigabitEthernet card may be unpredictable.
Please refer to notes described in "The order of instance numbers of optional cards"in "SPARC Enterprise Servers Hardware
Platform Guide" to install the GigabitEthernet card.
- PDF SPARC Enterprise Servers Hardware Platform Guide (290KB / April 2008)
Download
Before downloading and installing the driver ensure you have read and understood the notes and had necessary information on operating environment.
