- Warning against Counterfeit Products
- 150mm/200mm Matured Technology and Foundry Services
- 300mm Advanced Technology and Foundry Services
- Embedded Equipment IoT Products/Services
FRAM (Ferroelectric RAM) is a non-volatile and random access memory (RAM) which retains stored data even when power is turned off. As compared with conventional types of non-volatile memory, such as EEPROM and Flash memory, FRAM exhibits superior performance through faster write speeds, greater read/write cycle endurance and lower power consumption.
Since we started mass production of FRAM in 1999, Fujitsu Semiconductor has been assuring a high quality and stable supply of FRAM products to our valued customers for more than 15 years.
FRAM products of 4Kbit to 4Mbit are now available in production. Fujitsu is offering FRAM samples for customer evaluation. Please confirm our FRAM Product Lineup and request us samples and/or documents by the "FRAM Sample/Document Requests & Inquiry Form" if you would like to have.
|Write Method||Overwrite||Erase + Write||Erase + Write||Overwrite|
|Write Cycle Time||150ns||5ms||10µs||55ns|
|Data Backup Battery||No||No||No||Yes|
Comparing with conventional non-volatile memory such as EEPROM and Flash, FRAM has advantages in faster writing, higher endurance and lower power consumption. Using FRAM instead of EEPROM and Flash has more advantages;
1. Performance Improvement
FRAM's high-speed writing can take backup data at an instantaneous power supply interruption. Not only that, FRAM can record data more frequent than EEPROM and Flash memories. When writing the data, EEPROM and Flash memories need high voltage and thus, consume more power than FRAM. The battery of battery-powered device lives longer if FRAM embedded.
In summary, FRAM is;
2. Total Cost Reduction
In the case of parameter writing to each product at factory, FRAM can contribute to reduce manufacturing cost because FRAM can shorten the writing time compared with EEPROM and Flash memories. In addition, FRAM can give you one chip solution instead of multi-chip solution, e.g., 2 chips consisting of EEPROM+Flash, or 3 devices consisting of EEPROM+ SRAM+battery, to record frequent data log.
FRAM with parallel interface, which has compatibility with battery backup SRAM, can become a substitution of the SRAM. By replacing SRAM with the FRAM, customers expect to get the following advantages.
1. Total Cost Reduction
System using SRAM needs to keep control of battery-status check. By replacing with FRAM, customers can be freed from the burden of maintenance of battery check. In addition, FRAM does not require battery socket and backflow prevention diode and the space for them, which SRAM requires. FRAM's one chip solution can reduce the space and cost.
2. Eco-Friendly Product
Used battery becomes industrial waste. By replacing SRAM + battery solution with FRAM, unnecessary backup batteries can be reduced.
* EEPROM： Electronically Erasable and Programmable Read-Only Memory
Share this page