General Description

The MB15F02SL is a highly integrated solution for the generation of a stable, low noise, high frequency reference signal at a radio frequency of up to 1.2GHz, and an intermediate reference of up to 500MHz frequency for use as a local oscillator in modern digital or analogue communications systems.

Fabricated in Fujitsu's state of the art BiCMOS process UESBiC III, the MB15F02SL features integrated dual modulus prescalers, programmable CMOS dividers, low noise phase detectors and new programmable charge pump circuits. Programming is achieved over a three wire serial interface.

The MB15F02SL can be packaged in either 16SSOP, or in the new space saving 16BCC RF package.

General Description

The MB15F03SL is a highly integrated solution for the generation of a stable, low noise, high frequency reference signal at a radio frequency of up to 1.8GHz, and an intermediate reference of up to 600MHz frequency for use as a local oscillator in modern digital or analogue communications systems.

Fabricated in Fujitsu's state of the art BiCMOS process UESBiC III, the MB15F03SL features integrated dual modulus prescalers, programmable CMOS dividers, low noise phase detectors and new programmable charge pump circuits. Programming is achieved over a three wire serial interface.

The MB15F03SL can be packaged in either 16SSOP, or in the space saving 16BCC RF package.

General Description

The MB15F07SL is a highly integrated solution for the generation of stable, low noise, high frequency reference signals at a frequency of up to 1.2GHz for use as a local oscillator in modern digital or analogue communications systems.

Fabricated in Fujitsu's state of the art BiCMOS process UESBiC III, the MB15F07SL features integrated dual modulus prescalers, programmable CMOS dividers, low noise phase detectors and new programmable charge pump circuits. Programming is achieved over a three wire serial interface.

The MB15F07SL can be packaged in either 16SSOP, or in the new space saving 16BCC RF package.

General Description

The MB15F08SL is a highly integrated solution for the generation of a stable, low noise, high frequency reference signal at a radio frequency of up to 2.5GHz, and an intermediate reference of up to 1200MHz frequency for use as a local oscillator in modern digital or analogue communications systems.

Fabricated in Fujitsu's state of the art BiCMOS process UESBiC III, the MB15F08SL features integrated dual modulus prescalers, programmable CMOS dividers, low noise phase detectors and new programmable charge pump circuits. Programming is achieved over a three wire serial interface.

The MB15F08SL can be packaged in either 16SSOP, or in the new space saving 16BCC RF package.

Description

The Fujitsu MB15F72UL is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 1300 MHz and a 350 MHz prescalers. A 64/65 or a 128/129 for the 1300 MHz prescaler, and a 8/9 or a 16/17 for the 350 MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The BiCMOS process is used, as a result a supply current is typically 2.5 mA at 2.7 V. The supply voltage range is from 2.4 V to 3.6 V. A refined charge pump supplies well-balanced output current with 1.5 mA and 6 mA selectable by serial data. The data format is the same as the previous one MB15F02SL, MB12F72SP. Fast locking is achieved for adopting the new circuit.

The new package (BCC20) decreases the mount area of MB15F72UL by more than 30% compared with the former BCC16 (for dual PLL).

MB15F72UL is ideally suited for wireless mobile communications, such as CDMA..

General Description

The Fujitsu MB15F73UL is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 2250MHz and a 600MHz prescalers.

A 64/65 or a 128/129 for the 2250MHz prescaler, and a 8/9 or a 16/17 for the 600MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The latest BiCMOS process is used, as a result a supply current is typically 3.2mA typ. at 2.7V. The supply voltage range is from 2.4V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable by serial data. The data format is same as the previous one MB15F03SL, MB15F73SP. Fast locking is acheived for adopting the new circuit.

The new package(BCC20) decreases the mount area of MB15F73UL by more than 30% compared with the former BCC16(for dual PLL).

MB15F73UL is ideally suited for wireless mobile communications, such as GSM and CDMA.

Technical Features

• High frequency operation:
  
  • RF synthesizer: 2250MHz max
  • IF synthesizer: 600MHz max
• Low power supply voltage: VCC = 2.4 to 3.6 V
• Ultra Low power supply current : ICC = 3.2 mA typ. (VCC = Vp=2.7V, Ta=25°C, SW=0 in RF, IF locking state)
• Direct power saving function :Power supply current in power saving mode
  Typ. 0.1 mA(Vcc=Vp=2.7V, Ta=25°C), Max. 10 mA(Vcc=Vp=2.7V)
• Dual modulus prescaler : 2250MHz prescaler(64/65 or 128/129) / 600MHz prescaler(8/9 or 16/17)
• Serial input 14-bit programmable reference divider: R = 3 to 16,383
• Serial input programmable divider consisting of:
  
  • Binary 7-bit swallow counter: 0 to 127
  • Binary 11-bit programmable counter: 3 to 2,047
• On-chip phase comparator for fast lock and low noise
• On-chip phase control for phase comparator
• Operating temperature: Ta = -40 to 85°C
• Serial data format compatible with MB15F03SL

General Description

The Fujitsu MB15F74UL is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 4000MHz and a 2000MHz prescalers. A 64/65 or a 128/129 for the 4000MHz prescaler, and a 32/33 or a 64/65 for the 2000MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The latest BiCMOS process is used, as a result a supply current is typically 9.0mA typ. at 3.0V. The supply voltage range is from 2.7V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable by serial data. The data format is same as MB15F72/3/8UL series. Fast locking is acheived for adopting the new circuit.

The new package(BCC20) decreases the mount area of MB15F74UL by more than 30% compared with the former BCC16(for dual PLL). MB15F74UL is ideally suited for wireless mobile communications, such as W-LAN.

Technical Features

• High frequency operation:
  
  • RF synthesizer: 4000MHz max
  • IF synthesizer: 2000MHz max
• Low power supply voltage: VCC = 2.7 to 3.6 V
• Ultra Low power supply current : ICC = 9.0 mA typ. (VCC = Vp=3.0V, Ta=25°C, SW=0 in RF, IF locking state)
• Direct power saving function: Power supply current in power saving mode
  Typ. 0.1 mA(Vcc=Vp=3.0V, Ta=25°C), Max. 10 mA(Vcc=Vp=3.0V)
• Dual modulus prescaler : 4000MHz prescaler(64/65 or 128/129) / 2000MHz prescaler(32/33 or 64/65)
• Serial input 14-bit programmable reference divider: R = 3 to 16,383
• Serial input programmable divider consisting of:
  
  • Binary 7-bit swallow counter: 0 to 127
  • Binary 11-bit programmable counter: 3 to 2,047
• On-chip phase comparator for fast lock and low noise
• On-chip phase control for phase comparator
• Operating temperature: Ta = -40 to 85°C

General Description

The Fujitsu MB15F76UL is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 6000MHz and a 1500MHz prescalers. Both IF and RF PLL section have a 1/4 divider. And a 16/17 or a 32/33 for the 6000MHz prescaler, and a 4/5 or a 8/9 for the 1500MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The latest BiCMOS process is used, as a result, a supply current is typically 9.0mA typ. at 3.0V. The supply voltage range is from 2.7V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable by serial data. Fast locking is acheived for adopting the new circuit.

The new package(BCC20) decreases the mount area of MB15F76UL by more than 30% compared with the former BCC16 (for dual PLL).

MB15F76UL is ideally suited for wireless communications, such as W-LAN.

Technical Features

• High frequency operation:
  
  • RF synthesizer: 6000MHz max
  • IF synthesizer: 1500MHz max
• Low power supply voltage: VCC = 2.7 to 3.6 V
• Ultra Low power supply current : ICC = 9.0 mA typ. (VCC = Vp=3.0V, Ta=25°C, SW=0 in RF, IF locking state)
• Direct power saving function: Power supply current in power saving mode
  Typ. 0.1 mA(Vcc=Vp=3.0V, Ta=25°C), Max. 10 mA(Vcc=Vp=3.0V)
• Dual modulus prescaler : 6000MHz prescaler(16/17 or 32/33, and 1/4divider)
• 1500MHz prescaler(4/5 or 8/9, and 1/4divider)
• Serial input 14-bit programmable reference divider: R = 3 to 16,383
• Serial input programmable divider consisting of:
  
  • Binary 5-bit swallow counter: 0 to 31
  • Binary 13-bit programmable counter: 3 to 8191
• On-chip phase comparator for fast lock and low noise
• On-chip phase control for phase comparator
• Operating temperature: Ta = -40 to 85°C

General Description

The Fujitsu MB15F78UL is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 2600MHz and a 1200MHz prescalers. A 32/33 or a 64/65 for the 2600MHz prescaler, and a 16/17 or a 32/33 for the 1200MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The BiCMOS process is used, as a result a supply current is typically 4.5mA typ. at 2.7V. The supply voltage range is from 2.4V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable by serial data.The data format is same as the previous one MB15F08SL, MB15F78SP. Fast locking is acheived for adopting the new circuit.

The new package(BCC20) decreases the mount area of MB15F78UL by more than 30% compared with the former BCC16(for dual PLL).

MB15F78SP is ideally suited for wireless mobile communications, such as GSM and PCS.

Technical Features

• High frequency operation:
  
  • RF synthesizer: 2600MHz max
  • IF synthesizer: 1200MHz max
• Low power supply voltage: VCC = 2.4 to 3.6 V
• Ultra Low power supply current : ICC = 4.5 mA typ. (VCC = Vp=2.7V, Ta=25°C, SW=0 in TX, RX locking state)
• Direct power saving function:
  Power supply current in power saving mode
  Typ. 0.1 mA(Vcc=Vp=2.7V, Ta=25°C), Max. 10 mA(Vcc=Vp=2.7V)
• Dual modulus prescaler : 2600MHz prescaler(32/33. 64/65) / 1200MHz prescaler(16/17 or 32/33)
• Serial input 14-bit programmable reference divider: R = 3 to 16,383
• Serial input programmable divider consisting of:
  
  • Binary 7-bit swallow counter: 0 to 127
  • Binary 11-bit programmable counter: 3 to 2,047
• On-chip phase comparator for fast lock and low noise
• On-chip phase control for phase comparator
• Operating temperature: Ta = -40 to 85°C
• Serial data format compatible with MB15F08SL

Datasheet

PDF ASSP Dual Serial Input PLL Frequency Synthesizer (Small Package) [MB15F72UV, 150kb]
For samples contact your local Fujitsu sales representative.

General Description

The Fujitsu MB15F72UV is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 1300MHz and a 350MHz prescalers. A 64/65 or a 128/129 for the 1300MHz prescaler, and a 8/9 or a 16/17 for the 350MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The latest BiCMOS process is used, as a result a supply current is typically 2.5mA typ. at 2.7V. The supply voltage range is from 2.4V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable by serial data. The data format and the function as fast locking are same as the previous one MB15F72UL.

The new package(BCC18) decreases the mount area of MB15F72UV by about 50% compared with the former BCC20(for dual PLL, MB15F72UL).

MB15F72UV is ideally suited for wireless mobile communications, such as CDMA.

Technical Features

• Very small package: BCC18 (2.4*2.7*0.5mm)
• High frequency operation:
  
  • RF synthesizer: 1300MHz max
  • IF synthesizer: 350MHz max
• Low power supply voltage: VCC = 2.4 to 3.6 V
• Ultra Low power supply current : ICC = 2.5mA typ. (VCC = 2.7V, Ta=25°C, SW=0 in RF, IF locking state)
• Direct power saving function:
  Power supply current in power saving mode
  Typ. 0.1 µA(Vcc=2.7V, Ta=25°C), Max. 10 µA(Vcc=2.7V)
• Dual modulus prescaler : 1300MHz prescaler(64/65 or 128/129) / 350MHz prescaler(8/9 or 16/17)
• Serial input 14-bit programmable reference divider: R = 3 to 16,383
• Serial input programmable divider consisting of:
  
  • Binary 7-bit swallow counter: 0 to 127
  • Binary 11-bit programmable counter: 3 to 2,047
• On-chip phase comparator for fast lock and low noise
• On-chip phase control for phase comparator
• Operating temperature: Ta = -40 to 85°C
• Serial data format compatible with MB15F72UL

General Description

The Fujitsu MB15F73UV is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 2250MHz and a 600MHz prescalers. A 64/65 or a 128/129 for the 2250MHz prescaler, and a 8/9 or a 16/17 for the 600MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The latest BiCMOS process is used, as a result a supply current is typically 3.2mA typ. at 2.7V. The supply voltage range is from 2.4V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable by serial data. The data format and the function as fast locking are same as the previous one MB15F73UL.

The new package(BCC18) decreases the mount area of MB15F73UV by about 50% compared with the former BCC20(for dual PLL, MB15F73UL).

MB15F73UV is ideally suited for wireless mobile communications, such as CDMA.

Technical Features

• Very small package: BCC18 (2.4*2.7*0.5mm)
• High frequency operation:
  
  • RF synthesizer: 2250MHz max
  • IF synthesizer: 600MHz max
• Low power supply voltage: VCC = 2.4 to 3.6 V
• Ultra Low power supply current : ICC = 3.2 mA typ. (VCC = 2.7V, Ta=25°C, SW=0 in RF, IF locking state)
• Direct power saving function:
  Power supply current in power saving mode
  Typ. 0.1 µA(Vcc=2.7V, Ta=25°C), Max. 10 µA(Vcc=2.7V)
• Dual modulus prescaler : 2250MHz prescaler(64/65 or 128/129) / 600MHz prescaler(8/9 or 16/17)
• Serial input 14-bit programmable reference divider: R = 3 to 16,383
• Serial input programmable divider consisting of:
  
  • Binary 7-bit swallow counter: 0 to 127
  • Binary 11-bit programmable counter: 3 to 2,047
• On-chip phase comparator for fast lock and low noise
• On-chip phase control for phase comparator
• Operating temperature: Ta = -40 to 85°C
• Serial data format compatible with MB15F73UL

General Description

The Fujitsu MB15F74UV is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 4000MHz and a 2000MHz prescalers. A 64/65 or a 128/129 for the 4000MHz prescaler, and a 32/33 or a 64/65 for the 2000MHz prescaler can be selected for the prescaler that enables pulse swallow operation.

The latest BiCMOS process is used, as a result a supply current is typically 9.0mA typ. at 3.0V. The supply voltage range is from 2.7V to 3.6V. A refined charge pump supplies well-balanced output current with 1.5mA and 6mA selectable by serial data. The data format and the function as fast locking are same as the previous one MB15F74UL.

The new package(BCC18) decreases the mount area of MB15F74UV by about 50% compared with the former BCC20(for dual PLL, MB15F74UL).

MB15F74UV is ideally suited for wireless mobile communications, such as W-CDMA.

Technical Features

• Very small package: BCC18 (2.4*2.7*0.45mm)
• High frequency operation:
  
  • RF synthesizer: 4000MHz max
  • IF synthesizer: 2000MHz max
• Low power supply voltage: VCC = 2.7 to 3.6 V
• Ultra Low power supply current : ICC = 9.0 mA typ. (VCC = 3.0V, Ta=25°C, SW=0 in RF, IF locking state)
• Direct power saving function:
  Power supply current in power saving mode
  Typ. 0.1 µA(Vcc=3.0V, Ta=25°C), Max. 10 µA(Vcc=3.0V)
• Dual modulus prescaler : 4000MHz prescaler(64/65 or 128/129) / 2000MHz prescaler(32/33 or 64/65)
• Serial input 14-bit programmable reference divider: R = 3 to 16,383
• Serial input programmable divider consisting of:
  
  • Binary 7-bit swallow counter: 0 to 127
  • Binary 11-bit programmable counter: 3 to 2,047
• On-chip phase comparator for fast lock and low noise
• On-chip phase control for phase comparator
• Operating temperature: Ta = -40 to 85°C
• Serial data format compatible with MB15F74UL