MB87P2020A 'Jasmine' is a 2D graphics acceleration chip incorporating 8Mbit of embedded SDRAM eliminating the need for external memory devices for graphics memory. Its QFP208 package means that MB87P2020A 'Jasmine' is optimized for low-cost, compact automotive and consumer applications where a high level of functionality and system integration required. The MB87P2020A 'Jasmine' device is optimized to work as a companion chip for Fujitsu's 32-Bit MB91F36x family RISC devices.
MB87P2020A 'Jasmine' has a number of features which give a designer more flexibility in his application area. Its video input interface was developed to allow the input of several formats (including YUV) and is compatible to a wide range of video decoder chips. A programmable converter matrix (YUV to RGB) allows an application to write YUV format data directly to layers and to convert the data back to RGB for scanning.
In addition, a gamma correction table allows a system designer to adjust the picture characteristics according to the requirements of the display connected in conjunction with an extended color look-up table which can hold up to 512 entries.
MB87P2020A 'Jasmine' Block Diagram
- CMOS 0.25µm technology
- Flexible display controller for almost all standard LCD panels
- 4 layers of overlay display (out of 16 logical layers)
- RGB analog output (DAC)
- RGB digital output
- Includes 2D graphic acceleration functions
- Gamma correction
- Embedded SDRAM graphic memory 8Mbit (1MByte)
- Digital video input (RGB and YUV formats)
- CPU interface for FR series
- Supply voltage 3.3V (I/O), 2.5V (Internal)
- QFP208 Package
- Temperature range -40 to +85 °C
- Click here to go to Fujitsu Semiconductor's homepage on YouTube.
FPT-208P-M06 Package Specification
Link to Fujitsu Package Search website (please note that it is possible that new packages may not yet be in the database!)
Short Hardware Specification: Rev2.10 (58 pages, 600KB)
Hardware Manual: Rev1.8 (358 pages, 3.5MB)
Errata Sheet Rev1.00 (3 pages, 118KB)
Software Manual (Application Programming Interface) (41 pages, 224KB)
Application Note (Subboard Limitations) (5 pages, 4.8MB)
Application Note (Display Restriction) (4 pages, 152KB)
Application Note (MB90F497 Interface Schematic) (1 pages, 58KB)
Application Note (Memory calculation and layers) (6 pages, 41KB)
Application Note (DMA) (11 pages, 184KB)
FAQ's (Frequently Asked Questions) Rev1.00 (5 pages, 32KB)
IBIS Model: Rev1.0 (41KB)
Support Request Form
Please use the Support Request Form ONLY after first consulting your local distributor for support OR if you have a Support Contract in place with FSEU.
Use the link below to send a new support request to the GCC Application Group via email. This request will automatically processed using the internal Support Request system (OTRS). If you already have a ticket number (FME#: xxxxxxxx), then please use your email to follow up issues (i.e. do not use this link).
Create new GCC Support Request (read above first!)
General information about software is available from the Software Guide. To directly access software downloads for this device, please read the disclaimer below and continue by clicking on the button displayed.
Click here to see the terms and conditions of the Warranty and Disclaimer for software downloads before continuing below.
Ordering part number (GDC in standard package): MB87P2020A
Ordering part number (GDC in lead-free package): MB87P2040PMT-G-BND-DLE1
General Package Guide Database
Note: The two devices MB87P2020A and MB872040 are identical in pinning, functionality and electrical specifications. The following 'Part Number Change' document provides details on this issue: PCN Document
Ordering part number Cremson Starterkit mainboard with MB91F369 CPU and Debug RAM: CREMSON-STARTERKIT-CPU369
Ordering part number Cremson Starterkit mainboard with MB91F467 CPU and Debug RAM: SK-91F467D-208PFV
Ordering part number Cremson Starterkit subboard with MB872020A: CREMSON-STARTERKIT-JAS
