Skip to main content

Fujitsu

Europe, Middle East and Africa

MB86R01 'Jade'

Fujitu's first System-on-Chip (SoC) Graphics Controller

MB86R01 'Jade' is a highly-integrated device for embedded automotive graphics applications. Incorporating an ARM926EJ-S™ CPU core, together with an enhanced version of the successful Coral PA graphic processor and a number of external interfaces, this 90nm technology device is highly optimized for various types of applications which require outstanding CPU performance in combination with sophisticated 2D/3D graphics features in a compact SoC. Target applications include on-board and mobile navigation systems, graphical dashboard systems, HUD (head-up display) units, rear seat entertainment systems, Point of Sales terminals and industrial control panels.

MB86R01 'Jade' Block Diagram

MB86R01 'Jade' Block Diagram

Please note that the Graphics HMI Creator (GHC) software development tool is available for this device. Information about the availability of the GHC tool can be found on the Software Guide.

A comparison of the GDCs in the Jade product family is available here.

  • Next

  • CMOS 90 nm technology
  • ARM926EJ-S™ CPU core (320 MHz) with 16kb instruction and 16kb data cache
  • ETM9 and JTAG ICE interface
  • Internal memory controller frequency: 320 MHz
  • Display resolutions: standard industry display resolutions
  • 6 layers of overlay display (windows)
  • Alpha plane and constant alpha value for each layer
  • Dual display output (2 seperate display controllers are integrated supporting RGB8 and RGB16. Controller DISP0 also supports and RGB24
  • Dual digital video input (2 seperate video capture units supporting various formats including YUV, RGB and ITU656)
  • Video scaler (up/down scaling)
  • Video: Brightness, Contrast, Saturation control
  • Rendering engine for 2D/3D graphic acceleration functions
  • Geometry processor supporting floating point transformations
  • Texture mapping unit (up to 4096 x 4096)
  • Bit BLT Unit for transfers up to 4096 x 4096 surfaces
  • Alpha Bit BLT and ROP2 functions
  • External DDR2-SDRAM interface (166 MHz) for graphic memory (up to 128 Mbytes)
  • Parallel flash/SRAM host interface
  • Parallel ATA interface
  • SD card interface
  • CAN interface
  • Media LB interface
  • USB 2.0 (host and function) interface
  • I2C interface
  • I2S interface
  • SPI interface
  • ADC interface
  • PWM interface
  • GPIO interface
  • UART interface
  • BGA-484 Package
  • Temperature range -40 to +85 °C

Link to comparison table (all Jade devices)

  • Prev
  • Next

  • Click here to go to Fujitsu Semiconductor's homepage on YouTube.
  • Prev
  • Next

MB86R01 'Jade' Factsheet

BGA-484P-M07 Specification

Link to Fujitsu Package Search website (please note that it is possible that new packages may not yet be in the database!)

Data Sheet incl. Electrical Characteristics (88 pages, 1.2MB)

Hardware Manual: Rev1.60 (580 pages, 4.7MB)

Hardware Manual (GDC part): Rev1.10 (284 pages, 2.9MB)

Errata Sheet Rev1.40 (15 pages, 360KB)

Errata Bosch C_CAN (13 pages, 660KB)

Application Note (Display Parameter Calculation): Rev1.20 (12 pages, 534KB)

Application Note (Display Output Limitations): Rev1.10 (4 pages, 35KB)

Application Note (UART mode setting procedure): Rev0.20a (7 pages, 117KB)

Application Note (Horizontally reversing a captured image): Rev1.01 (5 pages, 61KB)

Application Note (Jade GHS Trace): Rev0.02 (13 pages, 218KB)

Application Note (Jade/Jade-L DDR2 Interface PCB Design Guide): Rev3.0 (29 pages, 2.6MB)

Application Note (USB2.0 PCB Design Guide): Rev1.80 (9 pages, 323KB)

Application Note (Power Consumption/Thermal Data): Rev1.00 (4 pages, 33KB)

Application Note (IDE66): Rev0.20a (7 pages, 150KB)

Application Note (STOP mode setting procedure): Rev0.1b (5 pages, 98KB)

Application Note (STANDBY mode setting procedure): Rev0.10a (5 pages, 104KB)

Application Note (Jade Toolchain Overview): Rev0.30 (1 page, 17KB)

Application Note (DDR2 Controller, Refresh in STOP Mode): Rev1.1 (7 pages, 80KB)

Example schematic for DDR2 connection to MB86R01 (54KB)

IBIS Model: Rev0.6 (85KB)

BDSL File (7KB)

Excel sheet tool to calc. frequencies: Rev1.00 (47KB)

Packaging (tray) datasheet (378KB)

Moisture Sensitivity Level specification (13KB)

Support Request Form

Please use the Support Request Form ONLY after first consulting your local distributor for support OR if you have a Support Contract in place with FSEU.

Use the link below to send a new support request to the GCC Application Group via email. This request will automatically processed using the internal Support Request system (OTRS). If you already have a ticket number (FME#: xxxxxxxx), then please use your email to follow up issues (i.e. do not use this link).

Create new GCC Support Request (read above first!)

  • Prev
  • Next

Please note that the following products are no longer available. However, support (free download links to schematics, gerber production data, example code, documentation etc.) for these products can be found on this website.

Fully-featured modular Jade Evaluation Board (four boards)

Fully-featured modular Jade/EmWi System

Jade / Jade-D GHS Probe Super Trace Adapter

Alternative Third-Party Development System (Promwad)

An external design and sales company outside the EU, Promwad has developed a modern, price-competitive and attractive Development Platform for the MB86R01 'Jade' device. CE certification for this system to enable its purchase and use within the EU can be discussed directly with Promwad (purchase and use outside the EU do not present a problem). For details on the system please check the following link: Jade Automotive Platform (currently in German) and read the respective case study (English) at Promwad's website.

  • Prev
  • Next

General information about software is available from the Software Guide. To directly access software downloads for this device, please read the disclaimer below and continue by clicking on the button displayed.

Click here to see the terms and conditions of the Warranty and Disclaimer for software downloads before continuing below.

  • Prev
  • Next

Ordering part number (lead-free package): MB86R01PB-GSE1

Please note that the following products are no longer available. However, support (free download links to schematics, gerber production data, example code, documentation etc.) for these products can be found on this website.

Jade Evaluation Board: SK-86R01

Jade / Jade-D GHS Probe Super Trace Adapter: SK-86R0X-GHS-TRACE-ADA

Alternative Third-Party Development System (Promwad)

An external design and sales company outside the EU, Promwad has developed a modern, price-competitive and attractive Development Platform for the MB86R01 'Jade' device. CE certification for this system to enable its purchase and use within the EU can be discussed directly with Promwad (purchase and use outside the EU do not present a problem). For details on the system please check the following link: Jade Automotive Platform (currently in German) and read the respective case study (English) at Promwad's website.

  • Prev