Skip to main content
  1. Avaleht >
  2. Support >
  3. ETERNUS VSS Hardware Provider Download

ETERNUS VSS Hardware Provider Download

This software is designed to provide support for Microsoft Volume Shadow Copy Service (VSS) with Fujitsu Disk Storage Systems. Use of this software with backup software and writer software supporting VSS delivers online backup using the one point copy (snapshot) capability of Advanced Copy function available with ETERNUS Disk storage systems.

For VSSHP supported storage systems, OSes, requester, and writer, refer to "Installation Information".


Download is free.
For use of ETERNUS VSS Hardware Provider (hereinafter called "this software"), Fujitsu requires that you agree with the following "Conditions of use". Using this software means the following conditions are agreed, so please desist from downloading if you don't agree.

Conditions of use

Please ensure that the following usage conditions are met when using this software.
Do not use this software if you cannot observe these use conditions.

  1. This software can be used only with the target model(s).
  2. This software cannot be redistributed.
  3. You may not reverse engineer, decompile or disassemble the software.
  4. Any copyright mark concerning this software may not be revoked.
  5. Any damage occurring following use of this software is at your own risk, Fujitsu will not assume any responsibility for operational problems.

How to download and install

  1. Download the file onto your computer.
  2. For settings and important information, refer to "User's Guide".
Version File name File size
2.1.0 For 32 bit OS icon-downloadETERNUS VSS Hardware Provider 2.1.0 14,190KB
For 64 bit OS icon-downloadETERNUS VSS Hardware Provider 2.1.0 13,710KB
User's Guide (1 MB) 2,096KB


The following table provides system requirement on ETERNUS VSS Hardware Provider.
Detailed revision numbers are listed at the "Installation Information" tab.

Supported Disk Storage Systems Disk Storage Systems ETERNUS DX100 S3/DX200 S3/DX500 S3/DX600 S3
ETERNUS DX8100 S2/DX8700 S2
ETERNUS DX8100/DX8400/DX8700
ETERNUS2000(model 100 or higher)
ETERNUS4000(model 300 or higher)
All Flash Arrays ETERNUS DX200F
Supported OS Microsoft® Windows Server® 2012 R2
Microsoft® Windows Server® 2012
Microsoft® Windows Server® 2008
Microsoft® Windows Server® 2008 R2
Backup software Microsoft® System Center Data Protection Manager
ETERNUS SF AdvancedCopy Manager
Symantec Backup Exec
Symantec NetBackup
Quest NetVault Backup
CA ARCserve Backup
SEP Sesam
Writer software System Writer (NTFS file system)
Microsoft® Exchange Server
Microsoft® SQL Server
Hyper-V™ VSS Writer (*Note 1)
Oracle Database 11g Release 2

As of May 8, 2014

*Note 1: The following guest OS are supported.
- Microsoft® Windows Server® 2012 R2
- Microsoft® Windows Server® 2012
- Microsoft® Windows Server® 2008
- Microsoft® Windows Server® 2008 R2
- Microsoft® Windows Server® 2003 R2

Please note the following :

  1. To allow full cooperation of server applications with this software, software patches may be required. Please contact your sales representative for each product to obtain any necessary patches.
  2. The specific disk storage system, copy mode, OS or server application support may differ depending on the backup software used. In addition, it is important to check for any restrictions there may be when using certain backup software with this software. For a list of any restrictions please contact your backup software sales representative.

Installation Information

Installation Information for ETERNUS VSS Hardware Provider is as follows.

Document name File size Date
ETERNUS VSS Hardware provider Installation Information (276 KB) 277KB May 2014

System Configuration Guide