Skip to main content
  1. Avaleht >
  2. Tugi>
  3. Introduction of FAQ when purchasing FUJITSU Image Scanner fi-Series.

Introduction of FAQ when purchasing FUJITSU Image Scanner fi-Series.

Q11. What type of SCSI connector should be used?
A11. The available SCSI connectors are as follows.
Model Connector type Terminator
fi-5900C [Note1]
fi-4990C
fi-4860C2
fi-4860C
Shield type 68 pins Equipped
M4099D
fi-5750C [Note2]
fi-5650C [Note2]
fi-4750L
fi-4750C
M4097D
fi-4640S
fi-5530C
fi-4530C [Note2]
fi-4340C
fi-5220C
fi-4220C2 [Note2]
fi-4220C [Note2]
fi-5120C
fi-4120C2 [Note2]
fi-4120C [Note2]
M3092DC
M3091DC
fi-5015C
Shield type half pitch 50 pins
Connector
M3096GX
M3093DG
M3093GX
Amphenol full pitch 50 pins
Connector
Attached

Note: Please do not use fi-4990C with other SCSI devices on the same bus.

For your information:

Model Connector type
fi-5750C [Note2]
fi-5650C [Note2]
RJ45 (10BaseT, 100BaseTX)
fi-5900C [Note1]
fi-5530C
fi-4530C [Note2]
fi-5220C
fi-4220C2 [Note2]
fi-5120C
fi-4120C2 [Note2]
fi-5110C
Type B (USB2.0/USB1.1)
fi-4220C [Note3]
fi-4120C [Note3]
fi-4110CU
fi-4010CU
Type B (USB1.1)
 

Note

1.fi-5900C is a dual interface scanner with Ultra-Wide SCSI & USB2.0/USB1.1.
(Please note that SCSI and USB cannot be used at the same time.)

2fi-4530C is a dual interface scanner with UltraSCSI & USB2.0/USB1.1.
(Please note that SCSI and USB cannot be used at the same time.)

3fi-4220C/fi-4120C is a dual interface scanner with SCSI-2 & USB1.1.
(Please note that SCSI and USB cannot be used at the same time.)