MB96340 系列: MB96F348RSAPQC
產品主要特點
CAN (2ch), LIN, ADC (24ch), 56 MHz
說明
MB96300 系列基於富士通先進的16FX 架構（16位元，採用指令流水線，可實現類似RISC的性能），CPU使用的指令集與現有的16LX 系列相同——可輕鬆實現從16LX 向新型16FX 產品的軟體移植。與上一代產品相比，16FX實現了大幅度的性能提升——即使在相同的工作頻率下，也可降低功耗和縮短啟動時間。
為了在優化功耗條件下實現最高處理速度，可選擇使用內部的PLL，使得外部4MHz諧振器為CPU提供內部高達56MHz 的工作頻率。由此可使最小指令週期降為17.8ns，也可獲得優異的EMI 性能。晶片內的一個時鐘調製電路可顯著降低頻譜中的發射峰值。發射功率可由晶片內的調壓器降低至最低限度，該調壓器可降低內部CPU電壓。功能靈活的時鐘可提供不同於CPU速度的工作頻率給週邊資源。
結搆圖
MB96F348RSAPQC - 產品特點
| CPU [Bits] | 16 |
| Package | FPT-100P-M22 |
| Pincount | 100 |
| Flash memory | 544.00 KByte |
| Flash Security (read protection) | yes |
| RAM (code & data) | 24.00 KByte |
| VCC min | 3.00 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 125 °C |
| Max. CPU frequency | 56.00 MHz |
| Clock Supervisor | yes |
| DMA channels | 6 |
| Max. I/Os | 82 |
| A/D Converter | 1 |
| A/D channels | 24 |
| A/D resolution | 10 bit |
| A/D conversion time (min.) | 1.700 µs |
| LIN-USART | 7 |
| CAN | 2 |
| I2C | 2 |
| Programmable Pulse Generator (PPG) | 16 |
| Output Compare Unit (OCU) | 8 |
| Input Capture Unit (ICU) | 8 |
| IOTimer | 2 |
| Reload Timer | 4 |
| Timebase Timer (TBT) | 1 |
| Real Time Clock (RTC) | yes |
| Watchdog | 1 |
| Alarm Comparator | 2 |
| Low Voltage Detection (LVD) | yes |
| External Bus | yes |
| External Bus mode | Multiplexed |
| Chip-Selects | 6 |
| External IRQ | 16 |
| CAN Message Buffers | 32 |
MB96F348RSAPQC - 文檔
| Datasheet | MB96300_shortspec_rev21_20070423.pdf |
| Hardware Manual | MB96300_HWM_rev11_20070424.pdf |
| Customer Information | CI-300010-E-V14-MB96300_List_of_Functional_Limitations.pdf |
| Package datasheet | FPT-100P-M22.pdf |
MB96F348RSAPQC - 初學者套件
| Starterkit | FLASH-CAN-100P-340 |
MB96F348RSAPQC - 模擬器
| EVA-Chip | MB96V300 |
| Emulation Main Unit | MB2198-01 |
| Emulation Pod/Adapter | MB2198-500 |
| Probe Cable | MB2198-501 |
| Socket | NQPACK100RB179, HQPACK100RB179 |
| Accessory Kit | ACCESSORIES16FX |
| Starterkit | FLASH-CAN-100P-340 |
MB96F348RSAPQC - ROM（快閃記憶體）編程工具
| Name |
Type |
Adapter |
| FLASH_PROGRAMMER_16FX |
serial (async) | |
| CONITEC GALEP-4 | serial | Conitec 210865 |
| CONITEC GALEP-4 | parallel | Conitec 210886 |
MB96F348RSAPQC - 軟體示例
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
| Template project for MB96346rs | 96340_template_96346rs-v11.zip |
| Template project for MB96346rw | 96340_template_96346rw-v13.zip |
| Template project for MB96347rs | 96340_template_96347rs-v11.zip |
| Template project for MB96347rw | 96340_template_96347rw-v11.zip |
| Template project for MB96348hs | 96340_template_96348hs-v11.zip |
| Template project for MB96348hw | 96340_template_96348hw-v11.zip |
| Template project for MB96348rs | 96340_template_96348rs-v11.zip |
| Template project for MB96348rw | 96340_template_96348rw-v11.zip |
| ADC demonstration | 96340_adc-v11.zip |
| ADC-DMA demonstration | 96340_adc_dma-v11.zip |
| ADC triggered by Reload Timer 1 | 96340_adc_rlt-v11.zip |
| Functionallity of the Alarm Comparator | 96340_alarmcomp-v11.zip |
| This project contains a boot strap loader and can be used to create application specific bootloaders. | 96340_bootloader_uart_async-v10.zip |
| Simple demo project showing CAN usage on 16FX microcontroller. | 96340_can-v12.zip |
| This example shows functionality of the CAN-controller (CAN0). It is controlled by a terminal on UART0. | 96340_can_uart_terminal-v10.zip |
| Clock output project | 96340_clk_out-v11.zip |
| Main Flash Erase/Programming example | 96340_flash_main-v10.zip |
| This is a sample project for access to main and satellite Flash of the MB96340 Series in a uniform manner. | 96340_flash_main_satellite-v10.zip |
| This is a sample project for access to satellite Flash of the MB96340 Series. | 96340_flash_satellite-v10.zip |
| This is a project template for the MB96340 Series with FLASH-CAN-100P board. | 96340_flashcan100p340-v12.zip |
| Free Running Timer and Input/Output Capture Units demonstration | 96340_frt_icu_frt_ocu-v11.zip |
| Free Running Timer demonstration with Interrupts | 96340_frt_irq-v11.zip |
| I2C-24C04-EEPROM example | 96340_i2c-v11.zip |
| ICU0 demonstration | 96340_icu0-v11.zip |
| Relocation of Interrupt Table | 96340_intvect-v11.zip |
| IO-Port demonstration | 96340_io-v11.zip |
| External interrupt demonstration | 96340_irq_ext-v11.zip |
| Example of usage of Low Power Modes | 96340_lpm-v12.zip |
| Example of usage of Stop Mode and External Interrupt Wake-up | 96340_lpm_stop-v11.zip |
| Ecxample of usage of Memory Patch Function with INT9 | 96340_mempatch-v11.zip |
| PPG0 phase sweep demonstration | 96340_ppg0-v11.zip |
| PPG0 phase sweep demonstration with RLT0 trigger | 96340_ppg0_rlt0_trg-v11.zip |
| PPG0 phase sweep demonstration with RLT6 as clock source | 96340_ppg0_rlt6-v11.zip |
| Phase-shifted PPG with DMA-ADC measurement | 96340_ppg_rlt_adc_dma-v11.zip |
| Reload Timer 0-4 demonstration with Interrupts | 96340_rlt_irq-v11.zip |
| Usage of the 3 source clock timers | 96340_src_clk_tmr-v11.zip |
| Software Reset Example | 96340_sw_reset-v11.zip |
| UART0 communication demonstration project | 96340_uart0_async-v11.zip |
| UART1 communication demonstration project | 96340_uart1_async-v11.zip |
| UART2 communication demonstration project | 96340_uart2_async-v11.zip |
| UART3 communication demonstration project | 96340_uart3_async-v11.zip |
| LIN-Master example project | 96340_uart_lin_master-v11.zip |
| LIN-Slave example project | 96340_uart_lin_slave-v11.zip |
| UART0 communication to external EEPROM via SPI | 96340_uart_sync_spi_nm93cs46-v11.zip |
| Watchdog Timer and Watchdog Reset demonstration | 96340_wdtmr_wdreset-v11.zip |
MB96F348RSAPQC - 應用筆記
Please find a selection of Application Notes here or check the complete overview:
| Shows the differences to be aware of when migrating from a 16LX project to the 16FX | mcu-an-300026-e-v11 |
| How to use IO-Ports | mcu-an-300200-e-v11 |
| How to use PPG | mcu-an-300201-e-v12 |
| Basic functionality of the Reload Timer | mcu-an-300202-e-v11 |
| How to use External Interrupts | mcu-an-300203-e-v11 |
| How to use the LIN-USART | mcu-an-300205-e-v11 |
| Installation of MB2198-01 based emulation system | mcu-an-300209-e-v10 |
| Getting started with MB2198-01 based emulation system and Softune | mcu-an-300217-e-v10 |
| Recommendations for 16FX hardware setup | mcu-an-300223-e-v13 |
| How to get started with a 16FX project in Softune | mcu-an-300233-e-v10 |
