MB95110 Series : MB95F116MAW
DESCRIPTION
The MB95110 Series has been developed as a general-purpose version of the F2MC-8FX family consisting of proprietary 8-bit
single-chip microcontrollers. In addition to a compact instruction set, the CLARINET Series is general-purpose, single-chip
microcontrollers with a wide range of internal peripheral functions.
BLOCK DIAGRAM
MB95F116MAW - PRODUCT FEATURES
| CPU [Bits] |
8 |
| Package |
FPT-52P-M01 |
| Pincount |
52 |
| Compact Flash |
32.00 KByte |
| Flash Security (read protection) |
yes |
| RAM (code & data) |
1.00 KByte |
| VCC min |
2.42 V |
| VCC max |
5.50 V |
| Min. Temperature |
-40 °C |
| Max. Temperature |
85 °C |
| Max. CPU frequency |
16.25 MHz |
| Clock Supervisor |
no |
| Max. I/Os |
37 |
| A/D Converter |
1 |
| A/D channels |
8 |
| A/D resolution |
10 bit |
| A/D conversion time (min.) |
1.700 µs |
| UART |
1 |
| LIN-USART |
1 |
| I2C |
1 |
| Programmable Pulse Generator (PPG) |
4 |
| Pulse Width Modulator (PWM) |
1 |
| Timer Counter |
2 |
| Timebase Timer (TBT) |
1 |
| Watchdog |
1 |
| Low Voltage Detection (LVD) |
no |
| External IRQ |
8 |
MB95F116MAW - DOCUMENTATION
MB95F116MAW - STARTERKITS
MB95F116MAW - DEBUGGER and EMULATOR
MB95F116MAW - (FLASH-)ROM PROGRAMMING TOOLS
MB95F116MAW - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task
under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
MB95F116MAW - APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
| This appnote for the 8L Family gives hints to optimize the EMI performance. |
mcu-an-389024-e-v11 |
| This document describes how to set up a new project for the 8FX Family. |
mcu-an-395001-e-v11 |
| This application note describes how to program the Flash device MB951xx in serial async mode. |
mcu-an-395003-e-v13 |
| How to use the Softune Workbench Monitor Debugger for 8FX. |
mcu-an-300049-e-v10 |
| This application note describes how to program the Flash device MB951xx in serial sync mode by use of MB2146-09. |
mcu-an-300050-e-v10 |
| This installation guide will help you set up the MB2146-09 BGM adapter with the MB2146-301 or MB2146-303 MCU board for Fujitsu
8FX microcontroller and its usage with 8-bit Softune Workbench V30L29 or higher.
|
mcu-an-395002-e-v10 |
