Skip to main content

Fujitsu

Canada

Change 

Software Downloads for TeamPoS 2000:
Port Setup for Non-OPOS Users

Installation of Fujitsu's OPOS device services will automatically set up the TeamPoS retail I/O communication ports for use in a Windows environment. In order for non-OPOS users to set up the ports under the various Windows operating systems, port configuration registry entry files are provided.

A single .ZIP file - MCPregs.zip - contains the registration entries that set up the appropriate ports under Windows 98, NT, 2000, and XP. The file also provides support for both the Retail I/O board (with 8 serial ports) and the TeamCOMBO board (with 4 serial ports and 4 Retail USB ports).

The files included are:

Filename Hardware Configuration Operating System
PNT100.reg Retail I/O board, address 0x0100 Windows NT, 2000, XP
PNT230.reg Retail I/O board, address 0x0230 Windows NT, 2000, XP
P95100.reg Retail I/O board, address 0x0100 Windows 95, 98
P95230.reg Retail I/O board, address 0x0230 Windows 95, 98
UNT100.reg TeamCOMBO, address 0x0100 Windows NT**, 2000, XP
UNT230.reg TeamCOMBO, address 0x0230 Windows NT**, 2000, XP
U95100.reg TeamCOMBO, address 0x0100 Windows 95, 98
U95230.reg TeamCOMBO, address 0x0230 Windows 95, 98

**Note: Windows NT does not directly support USB devices; only the serial ports are accessible.

Instructions

  1. Download and save file MCPregs.zip to disk.
  2. Expand the zip file.
  3. Double-click on the .reg file for the appropriate Windows version and Retail I/O board base address.
  4. Click "yes" confirming that you want the registry entries applied.
  5. Reboot the system.

Top of Page

About Fujitsu America