DESCRIPTION

To install the Software Sample Files please download the compressed self-extracting file. The Standard Installation Target Directory is:

C:\Softune\sample\smplfr

FEATUTRES

• Template
  This is a project template for the MB91230 Series. It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application.
• ADC0
  The ADC0 project initialise ADC0. Channel 0, Single mode, acivation by software. The result is output via UART0 (9600bd, 8N1). SKWizard Terminal program can be used to get the results from MB91230 Starterkit.
• IOPort
  The IOPort project initialise Port 1 to output. Port function register is set to I/O port. When using StarterkitMB91230 the LED's are driven.
• OCU
  The OCU project initialise 16-bit Freerun-timer 0 and OCU ch.0/1. No interrupts are used. OCU comapre register ase set at initialisation routine.
• OCU01
  The OCU01 project initialise 16-bit Freerun-timer 0 and OCU ch.0/1. OCU compare register ase set at initialisation routine. Channel 0 is used to set the fundamental frequency. Channel 1 is matching for ch0 and ch1 compare values. Ch1 compare value defines Duty period. Ch0 interrupt is used to change Duty period OCC1 value.
• PPG
  The PPG project initialise PPG ch0. PWM mode, activated by Software trigger, int enabled (activated by duty cycle). Within the ISR of PPG0 the duty period is increased.
• Reload
  All 4 Reload Timers are initialised. Interrupts enable, reload mode, start by software trigger. Within the ISR of each Reload Timer some ports of Port1 are toggled. When using the StarterkitMB91230 this port1 is connect to the LED.
• UART0
  The UART0 project initialises UART0. Asynchron (Mode0), 9600bd, 8N1, LSB first. 16MHz at Resource Bus. No interrupts are used. The MCU echos all received data.
• UART1
  The UART1 project initialises UART1. Asynchron (Mode0), 9600bd, 8N1, LSB first. 16MHz at Resource Bus. No interrupts are used. The MCU echos all received data.
• History of the MB91230:

DOWNLOAD

Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.

EXESelf-extracting Sample Files for MB91230 Series V01R02 (548 KB, 11, September 2006)