FUJITSU


Consumer

Low Power, Low Cost, Compact MCU Applications

As microcontroller designs continue to move into smaller applications with limited power resources, the availability of small pin count devices with complex peripherals and power saving features have become increasingly desirable.

To answer this need, Fujitsu is proud to present F2MC-8FX family microcontrollers with peripheral rich, low pin count devices with a wealth of features. Devices include power saving features, new clock control features including a multi-frequency internal RC oscillator, on-chip dual op Flash memory for EEPROM emulation , on chip debug, software controlled brown out and watchdog timer resets, Flash program memory, and a host of other new features that will make small footprint designs more powerful and power efficient than ever before.

F2MC-8FX Family MB95100 Series

Product Family Selection Overview
F2MC-8FX Family-MB95100 Series MB95100AM
LIN, Dual Op. Flash
MB95110M/N/B Series
High-Performance 16MHz, LIN, Dual Op. Flash
MB95120MB Series
High Performance 16MHz, Built-in LCDC 40x4, LIN, Dual Op. Flash
MB95130M/N Series
High Performance 16MHz, Compact, general purpose, LIN, Dual Op.
MB95140M/N Series
High Performance 16MHz, Compact, general purpose, LIN, Dual Op.
MB95150M/N Series
Built-in LCDC (16segx4com), LIN-UART, Dual Op. Flash
MB95160M/N/J Series
Built-in LCDC (32 SEG x 4COM), LIN-UART, Dual Op. Flash
F2MC-8FX Family-MB95200 Series
MB95200H Series
20 Pin Count, 6ch, 8bit or 10bit selectable
MB95210H Series
8 Pin Count, 2ch, 8bit or 10bit selectable
MB95220H Series 16 Pin Count, 2ch, 8bit or 10bit selectable

USB Applications

Industrial applications are increasingly requiring USB resources. Fujitsu aims to target this demand with the MB90330/335 (16LX) and MB96330U (16FX) series.

The line-up offers high-performance 16-bit MCUs (F2MC-16LX and F2MC-16FX family) with built-in USB macros, supporting USB-Function and simplified USB-MiniHost. This allows a USB device to act either as a USB-Host or as a USB-Function. In this way, USB peripheral devices can exchange data without the mediation of a PC. In addition to standard LIN-USART/SPI and I2C interfaces, the MB96330U series offers three channels of CAN to cover all sorts of connectivity requirements.

Product Line-Up

Device M96F338U MB90F334 MB90333 MB90F337 MB90337
Series
MB96330
MB90330
MB90330
MB90335
MB90335
CPU
16FX 48MHz 16LX 24MHz 16LX 24MHz 16LX 24MHz 16LX 24MHz
ROM
544kBytes Flash 384kBytes Flash 256kBytes Mask ROM 64kBytes Flash 64kBytes Mask ROM
RAM
32kBytes 24kBytes 16kBytes 4kBytes 4kBytes
USB
USB Full-speed, USB Function, USB MiniHost
CAN
3ch, 32 message buffers each  -   -   -   - 
ADC 10-bit
36 channels 16 channels 16 channels  -   - 
UART
8 channels USART, SPI, LIN 4 channels 4 channels 2 channels 2 channels
SIO
8 channels USART, SPI, LIN 1 channel 1 channel 1 channel 1 channel
I²C
2 channels 3 channels 3 channels 1 channel 1 channel
PWM
20 x 16-bit 3 x 16-bit/ 6 x 8-bit 3 x 16-bit/ 6 x 8-bit 2 x 16-bit/ 4 x 8-bit 2 x 16-bit/ 4 x 8-bit
Timer
4 x I/O timer 16-bit, 4 x Reload timer 16-bit, Time Base Timer I/O Timer 16-bit, 3 x Reload Timer 16-bit, 16-bit PWC Reload Timer 16-bit, PWC 16-bit
Ext. Interrupt
16 channels 8 channels 8 channels 8 channels 8 channels
Ext. Bus Interface
MUX/Non-MUX MUX/Non-MUX MUX/Non-MUX  -  -
Supply voltage
3.0 to 5.0V 3.0 to 3.6V 3.0 to 3.6V 3.0 to 3.6V 3.0 to 3.6V
Package
FPT-144P FPT-120P FPT-120P FPT-64P FPT-64P

USB Drivers

Developed by Fujitsu and Thesycon, USB drivers are available free of charge from the download site.

The drivers support both USB-Function and USB-Minihost for MB90330/335 and MB96330U, fulfil standard API norms based on Full-Speed USB specification and can reach a data transfer rate of 1 MByte/s in bulk at full speed.

Furthermore, Fujitsu provides software examples including a mass storage class and open source file