- What's New
- How to Buy
- ASIC / Foundry Services
- WiMAX
- 1394 Automotive
- Microcontrollers
- USB 3.0
- RF Transceivers
- Networking ASSP
- Analog Products
- H.264
- Graphics Display Controllers
- Memory
- Documentation Library
MB96300 series is based on Fujitsu’s advanced 16FX architecture (16-bit with instruction pipeline for RISC-like performance). The CPU uses the same instruction set as the established 16LX series - thus allowing for easy migration of 16LX Software to the new 16FX products. 16FX improvements compared to the previous generation include significantly improved performance - even at the same operation frequency, reduced power consumption and faster start-up time.
For highest processing speed at optimized power consumption an internal PLL can be selected to supply the CPU with up to 56MHz operation frequency from an external 4MHz resonator. The result is a minimum instruction cycle time of 17.8ns going together with excellent EMI behavior. An on-chip clock modulation circuit significantly reduces emission peaks in the frequency spectrum. The emitted power is minimized by the on-chip voltage regulator that reduces the internal CPU voltage. A flexible clock tree allows one to select suitable operation frequencies for peripheral resources independent of the CPU speed.

| Specification | Description |
| CPU [Bits] | 16 |
| Package | FPT-64P-M23 |
| Pincount | 64 |
| Flash memory | 288.00 KByte |
| Flash Security (read protection) | yes |
| RAM (code & data) | 12.00 KByte |
| VCC min | 3.00 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 125 °C |
| Max. CPU frequency | 56.00 MHz |
| Subclock | yes |
| Clock Supervisor | yes |
| DMA channels | 4 |
| Max. I/Os | 49 |
| A/D Converter | 1 |
| A/D channels | 15 |
| A/D resolution | 10 bit |
| LIN-USART | 4 |
| CAN | 2 |
| I2C | 1 |
| Programmable Pulse Generator (PPG) | 20 |
| Output Compare Unit (OCU) | 4 |
| Input Capture Unit (ICU) | 6 |
| IOTimer | 2 |
| Reload Timer | 4 |
| Timebase Timer (TBT) | 1 |
| Clock Timer | 1 |
| Real Time Clock (RTC) | yes |
| Watchdog | 1 |
| Low Voltage Detection (LVD) | yes |
| External Bus | yes |
| External Bus mode | Multiplexed |
| Chip-Selects | 6 |
| External IRQ | 13 |
| CAN Message Buffers | 32 |
CI-300010-E-V32-MB96300_List_of_functional_limitations
CI-300023-E-V10-16FXFL0041-SCEQ-SCWEQ-instruction
CI-300024-E-v11-16FXFL0042-WBTC-WBTS-instruction
CI-300026-E-v10-16FXFL0043-USART-RTC-irq-RTI
CI704-00002-1v0-E
CI704-00008-1v0-E
MB96350_DS_rev7_20100624
MB96320-MB96340-MB96350-MB96380-find-article
MB96300-HWM-rev16-20081107
fpt-64p-m23
prog16fx-cm44-00203-3e
CM44-00203-3ET
EUROScope
EVA-Chip EVA-Chip
MB96V300B
Socket
NQPACK064SD, HQPACK064SB140
ACCESSORIES16FX
MB2198-01-E
MB2198-500-E
PSU_SNG12-24W
MB2198-504
FLASH-CAN-64P-350-PMC
CONITEC GALEP
serial
Conitec 210865/210915
CONITEC GALEP
parallel
Conitec 210894
serial (async)
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
Please find a selection of Application Notes here or check the complete overview: