Introduction |  Products and Features |  Compatability |

---

Fujitsu Microelectronics introduces the next generation of 16-bit microcontrollers - the 16FX series.

Fast

16FX series is based on an improved CPU with significantly increased internal bus bandwidth. As a result, program execution is accelerated, as can be seen in the Dhrystone benchmark (Dhrystone 2.1 compared to MB90340 series). 16FX is about 3 times faster (depending on the memory model used) than 16LX at the same clock frequency. For example at 24MHz 16FX achieves more than 11 real MIPS (Dhrystone 2.1). The architecture improvement is particularly visible when handling large data structures (see memory model ‘Large’ in graph 1). But that’s not all. New technology and improved design allow for CPU frequencies up to 56MHz - thus achieving processing performance ranges of 32-bit process.

Efficient

16FX combines the advantages of 16- and 32-bit architectures. The C-code efficiency benefits from the 16-bit instruction set. Instruction Pipelining, a technique widely used in the 32-bit RISC world, allows 16FX to reach RISC-like performance. With instructions completed in less clock cycles, the same performance is achieved with less power consumption (compared to architectures without pipelining).

The 16-bit bus width again is an advantage for a low power consumption result compared to 32-bit architectures. A 32-bit bus will have a higher capacitance which increases current consumption particularly at high frequencies. The use of latest CMOS technology also translates into efficient use of silicon space (smaller chip) and lower power consumption.

16FX specific power reduction features include a reduced internal CPU supply voltage, peripheral clock speed selectable independently from CPU speed, and reduced number of clocks per instruction (CPI). The result is an 80% reduction in power consumption compared to 16LX at the same performance.

 1     2       3      Next Page