Features:

• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Connectors available with 30 to 120 contacts - Available in vertical and right- angle, through-hole mount
• RoHS compliant from original design
• IDC cable socket to plug pcb option available (30-100 contact)

Features:

• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Tab/tuning fork contact design
• Available in vertical and right-angle, through-hole mount
• Connectors available with 34 to 96 contacts
• Connectors with 68 contacts comply with SCSI III interface
• Connectors with 96 contacts comply with S-bus interface
• RoHS compliant

Features:

• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Available in 20 to 100 contacts
• Terminates to 0.100” flat ribbon, 28AWG ribbon cable
• Board-mount plug with latches
• RoHS compliant from original design

Features:

• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Bellows-style contact design
• Available in vertical and right- angle, through-hole mount
• Available with 34 to 192 contacts
• Self alignment available as option in some pin counts
• Supports SCAII (80Pin)
• RoHS compliant

Features:

• Half pitch connector conformed to SCA system (80 pins)
• Add mating guide and ESD protection to do plug-in safety and reliability
• Hot-plugging. Ground contacts mate first before other contacts mate when engagement is done (conforms to SCA.2 specification)
• To prevent pin-bending, bellows contacts are used
• Plug: 2 types are available: 1) The center of a SMT plug mates the center of a PCB. 2) 0.9 mm (0.035 in.) off-set from center

Features:

• Board-to-board (BtoB) “stacking” heights available from 8mm through 14mm
• Contact count from 20-120 contacts
• Through-hole design
• RoHS compliant from original design

Features:

• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Available in 20 to 100 contacts
• Die-cast backshell design (latches and thumbscrew versions available)
• IDC plug cable mount
• Supports SCSI II and III I/O standards
• RoHS compliant (check web site for specific implementation date with specific part number)

Features:

• Not for New Design
• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Available in 20 to 68 contacts
• Die-cast backshell design (latches and thumbscrew versions available)
• IDC plug cable mount - Supports SCSI II and III I/O standards
• RoHS compliant (check web site for specific implementation date with specific part number)

Features:

• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Available in 20 to 68 contacts
• Die cast backshell design (latches and thumbscrew versions available)
• IDC plug cable mount
• Supports SCSI II and III I/O standards
• RoHS compliant (check web site for specific implementation date with specific part number)

Features:

• Not for new designs except 96-pin version
• Two-row, 1.27mm (0.050in.) pitch arrangement allows high-density mounting
• Available in 96 contacts only - Die cast backshell design (96 pin only)
• IDC plug cable mount
• RoHS compliant (check web site for specific implementation date with specific part number)