Fujitsu America Inc. Microelectronics : FUJITSU Canada

Home >
News >
Press Releases >
Press Archives >
By Topic >
2003 >
Fujitsu America Inc. Microelectronics

Printable Version

Microelectronics

16 December 2003 Sunnyvale, CA: Fujitsu and Cogent Systems to Collaborate to Provide Comprehensive Fingerprint Biometric Solutions
Sunnyvale, CA, December 16, 2003 – Industry Leaders will Enable Hardware-Software Solutions for Physical and Logical Access Control, Network and Mobile Security
24 November 2003 Sunnyvale, CA: Fujitsu Adds Ultra-Slim Solid State Relay for Industrial and Appliance Markets
Sunnyvale, CA, November 24, 2003 – Fujitsu Components America, Inc. today announced it has expanded its relay offering for the industrial control and appliance markets with the addition of an ultra-slim solid-state device.
20 November 2003 Sunnyvale, CA: Fujitsu Introduces ARM9 Multi-CPU Evaluation Device
Sunnyvale, CA, November 20, 2003 – Fujitsu Microelectronics America, Inc. (FMA) today introduced a new ARM9 multi-CPU evaluation device, the MB87Q1100, as part of a platform developed to enable customers to design large, complex systems with very high levels of predictability and efficiency. The MB87Q1100 integrates the ARM926EJ-S and ARM946E-S embedded macrocell cores in Fujitsu's next-generation System-on-Chip (SoC) platform.
28 October 2003 Sunnyvale, CA: Fujitsu Introduces Its Smallest Thermal Printer Mechanism with Cutter
Sunnyvale, CA, October 28, 2003 – Fujitsu Components America, Inc. today released an ultra-compact 24V thermal printer mechanism and guillotine cutter combination that is the smallest the company offers.
21 October 2003 Sunnyvale, CA: Fujitsu Interconnect Technologies Introduces Third-Generation Multi-Via Technology to Reduce Manufacturing Costs for Printed Circuit Boards
Sunnyvale, CA, October 21, 2003 – Fujitsu Interconnect Technologies Limited (FICT) today introduced products based on its next-generation Multi-Via 3 (MV3) technology, which reduces manufacturing costs and makes it easier to design multi-layer Printed Circuit Boards (PCBs).
24 September 2003 Sunnyvale and San Diego, CA: Pulse~LINK Selects Fujitsu to Co-develop CMOS SoC ASIC
Sunnyvale and San Diego, CA, September 24, 2003 – Pulse~LINK, Inc. and Fujitsu Microelectronics America, Inc. (FMA) today signed an agreement to jointly develop a digital baseband processor using Fujitsu’s 0.11-micron CMOS SoC ASIC solutions. This ASIC will be used in the Pulse~LINK system designed specifically for the world’s first Ultra Wideband Wireless Local Area Network (WLAN).
16 September 2003 Sunnyvale, CA and Boston, MA: New 16-bit Microcontrollers from Fujitsu for LCD Display Control
Sunnyvale, CA and Boston, MA, September 16, 2003 – To be Introduced at Embedded Systems Conference, Booth 909.
9 September 2003 Sunnyvale, CA: Fujitsu Announces New FRAM ICs for Security
Sunnyvale, CA, September 9, 2003 – Company Extends Leadership in Advanced Memory Technology with Embedded and Standalone FRAM Devices
9 September 2003 Sunnyvale, CA: Fujitsu Delivers a Series of High-Performance ASICs to Foundry Networks
Sunnyvale, CA, September 9, 2003 – Fujitsu, Foundry Networks Continue Strong, Multi-Year Collaboration
9 September 2003 Sunnyvale, CA: Fujitsu Introduces Industry’s First 10Gbps SERDES Macro for Networking Designs
Sunnyvale, CA, September 9, 2003 – Low Power, Low Voltage and High-Performance Macro Maintains Fujitsu’s Leadership in 10Gbps Technology
9 September 2003 Sunnyvale, CA: Fujitsu’s New Printer Mechanisms Offer Performance and Durability at a Cost-Effective Price Point
Sunnyvale, CA, September 9, 2003 – Fujitsu Components America, Inc. today released a new series of 24V compact and lightweight, high-speed thermal printer mechanisms for cost-conscious POS, banking, kiosk, test and measurement, and medical equipment applications.
9 September 2003 Sunnyvale, CA: New 32-Bit FR60Lite RISC Microcontrollers from Fujitsu
Sunnyvale, CA, September 9, 2003 – MCUs Designed for Digital Consumer, Mobile Devices and Intelligent Household Equipment
3 September 2003 Sunnyvale, CA: Fujitsu Demonstrates New 10Gbps Ethernet Switch IC At Gigabit Ethernet Conference
Sunnyvale, CA, September 3, 2003 – Also presenting “Gigabit to the Desktop / Gigabit Ethernet and Beyond᾿ on September 9 at 3 p.m. at GEC Pavilion
25 August 2003 Sunnyvale, CA: Fujitsu Expands High-Speed Connector Series
Sunnyvale, CA, August 25, 2003 – Fujitsu Components America, Inc. has expanded its microGiGaCN™ high-speed, differential connector line by adding an I/O plug with thumbscrews, which is the standard I/O configuration for Serial Attached SCSI 4-lane, Serial ATA-2 4-lane and 10G Fiber Channel technology. Fujitsu’s microGiGaCN series now offers a full-range of industry-standard, high-speed copper interconnects for various high-speed transport technologies.
25 August 2003 Sunnyvale, CA: Fujitsu Introduces New 128Mbit Burst Mode Mobile FCRAM
Sunnyvale, CA, August 25, 2003 – Fujitsu Microelectronics America, Inc. (FMA) has introduced a new 128Mbit mobile FCRAM device based on the company's Fast Cycle RAM (FCRAMTM) architecture.
11 August 2003 Fairfield, NJ: Fujitsu General America Inc.'s High-Performance PLASMAVISION® SLIMSCREEN® Displays Take Center Stage in Global Installation of Interactive Telepresence Technology Invented by Teliris
Fairfield, NJ, August 11, 2003 – Fujitsu General America Inc., the global leader in plasma display technology, was selected by Teliris Ltd., the world's leading provider of Interactive Telepresence solutions, as a technology provider for the installation of a state-of-the-art GlobalTable meeting environment. The unique installation for a multinational pharmaceutical corporation features 43 Fujitsu Plasmavision SlimScreen monitors as part of a complete interactive telepresence system in corporate offices networked throughout the United States and England.
5 August 2003 Sunnyvale, CA: New Ultra-Small Dual PLL Frequency Synthesizer from Fujitsu
Sunnyvale, CA, August 5, 2003 – Volume Reduction Enables Significant Miniaturization with Excellent System Performance
29 July 2003 Sunnyvale, CA: Fujitsu Releases Matched-Impedance Loop Back Module for High-Speed Systems
Sunnyvale, CA, July 29, 2003 – Fujitsu Components America, Inc. today released a matched-impedance loop-back module for testing systems operating at 500Mbps to 3.2Gbps per channel. The new module is an expansion of Fujitsu’s high-speed, microGiGaCNTM differential connector series.
22 July 2003 Sunnyvale, CA: Fujitsu's New MBF310 Fingerprint Sensor Ideal for New Generation of Mobile Phones
Sunnyvale, CA, July 22, 2003 – FIFO Memory and Low Power Consumption Delivered in Compact, Durable 42-pin Plastic FBGA Package with Integrated Finger Guide
25 June 2003 Sunnyvale, CA: Fujitsu Introduce Industry’s First Single-Chip 10Gbps Ethernet Switch Chip
Sunnyvale, CA, June 25, 2003 – Layer 2 Switch Features Shared Memory, Wire-Speed Operation for New Generation of Server, Storage Applications
16 June 2003 Fairfield, NJ: Fujitsu Plasmavision Slimscreen Monitors Star in "James Bond-ish" Home Theater Installation at Posh Four Seasons Condo Residence
Fairfield, NJ, June 16, 2003 – Home Entertainment Design (HED), a high-end custom installation specialist located in Long Island City, New York, has just completed the installation of an ultra-posh multi-screen home theater system featuring three Fujitsu Plasmavision SlimScreen® monitors at the Four Seasons condominium residences in San Francisco. The home theater installation, featuring a futuristic design worthy of a James Bond film, incorporates two Fujitsu P50XHA10 50-inch high-definition widescreen (16:9) monitors (one in the kitchen and one in the bedroom), as well as a 61-inch PDS-6101 Plasmavision set in the living room.
9 June 2003 Chicago, IL: PFU Systems™ Bases Next Generation Plug-N-Run™ G3 System-on-Modules on Intel ® Pentium ® M Processor and Intel ® 855GM Chipset
Chicago, IL, June 9, 2003 – PFU Systems, Inc., a Fujitsu Company, leader in applied information technology and System-on-Module (SoM) components for OEM embedded applications, announced today support for the newly announced Intel ® Pentium ® M processor and Intel® 855GM chipset in its third-generation Plug-N-Run™ System-on-Modules for embedded solutions. The new modules enable OEM designers to quickly develop Pentium M processor embedded systems with fully qualified and tested, off-the-shelf components; thereby minimizing development time, cost and risk.
28 May 2003 Sunnyvale, CA: Fujitsu Offers Copper Cable Assemblies for High-Speed Applications
Sunnyvale, CA, May 28, 2003 – Fujitsu Components America, Inc., the developer of the high-speed MicroGiGaCN™ interconnect series, today announced availability of high-bandwidth copper cable assemblies that meet the InfiniBand™ electrical and mechanical specifications.
21 May 2003 Sunnyvale, CA: Fujitsu Introduces Two Mobile FCRAM Burst Mode Devices for 3G Cellular Phones
Sunnyvale, CA, May 21, 2003 – Complies with Common Specifications for Mobile RAM (COSMORAM)
20 May 2003 Sunnyvale, CA: Fujitsu Releases Circularly Polarized Resistive Touch Panels for Sunlight Readability
Sunnyvale, CA, May 20, 2003 – Fujitsu Components America, Inc. today expanded its touch panel offering by releasing a line of custom, circularly polarized touch panels that greatly enhance display readability in direct sunlight conditions. The touch panels eliminate over 60% of reflected ambient light while maintaining 79% luminance transmissivity.
19 May 2003 Sunnyvale, CA: Fujitsu Components and Apollo Display Technologies Offer Smart Kits for LCD and Touch-Panel Integration
Sunnyvale, CA, May 19, 2003 – Fujitsu Components America, Inc., a touch panel manufacturer, and Apollo Displays, a manufacturer and value-added distributor of display products, today announced they have joined forces and introduced a new line of touch-integrated display kits for fine-pixel LCDs. The kits are designed to save time and money by simplifying the integration of a LCD with a touch panel for various applications.
13 May 2003 Sunnyvale, CA: New Printer Design Simplifies Mounting Process
Sunnyvale, CA, May 13, 2003 – Fujitsu Components America Inc. today released an ultra-compact thermal printer mechanism with a platen unit that is “easy mount.᾿ The new design simplifies the printer’s installation into applications such as portable or mobile devices, Point-of-Sale equipment, and measurement and medical instrumentation.
6 May 2003 Sunnyvale, CA: Fujitsu Components and Comodo Demonstrate the Future of Secure Input at WINHEC 2003
Sunnyvale, CA, May 6, 2003 – Fujitsu Components, Ltd., manufacturer of quality electronic components, and Comodo, the Internet security specialists, have today announced a demonstration of SIDEN Trust Chip, among the first 'Secure Input Devices Ever Developed' as defined by the new NGSCB, at WinHEC 2003, May 6-8 2003.
2 May 2003 Fairfield, NJ: Fujitsu Broadens its Halcyon Mini-Split Lineup with New 42,000 and 36,000 BTU Ceiling Cassette Systems
Fairfield, NJ, May 2, 2003 – Fujitsu General America, Inc., a leader in advanced-technology HVAC solutions, has added its slim-profile model 42RC and model 36RC ceiling cassette systems to its Halcyon product line. The new 42,000 BTU System 42RC and 36,000 BTU System 36RC mini-split cooling/heating systems are the first to incorporate Fujitsu’s new Slender-Fit feature, which enables the cassette housing to be moved downward into the room by 1-3/8", requiring just 9-7/8" of clearance above the ceiling.
1 May 2003 Sunnyvale, CA: Fujitsu's Sweep Sensor, MBF300 Biometric Sensor IC Wins 2002 EDN Magazine Innovation Award
Sunnyvale, CA, May 1, 2003 – EDN Magazine announced that Fujitsu's MBF300, Sweep Sensor™ IC won the 2002 "Innovation of the Year" award in the peripherals category. The announcement was made at EDN's annual award dinner April 22 in San Francisco.
29 April 2003 Sunnyvale, CA: Fujitsu Begins Manufacturing Lead-Free Relays
Sunnyvale, CA, April 29, 2003 – To address world-wide environmental concerns, Fujitsu Components America, Inc. today announced that it will switch to lead-free relays and begin shipments in June 2003. The company’s other product lines (connectors, resistive touch panels, thermal printers, KVM switches, and keyboards) will be converted to lead-free materials by March 2004.
23 April 2003 Sunnyvale, CA: Fujitsu Introduces 32-Bit MCU with Embedded Flash, Dual CAN Buses
Sunnyvale, CA, April 23, 2003 – Fujitsu Microelectronics America Inc. (FMA) today introduced a 32-bit microcontroller for automotive and industrial applications, built with the Control Access Network (CAN) interface, 768 Kilobytes of embedded flash memory and a wide range of peripherals. The new MCU is ideal for dashboard display, data gateway with central-control capability and other in-vehicle applications.
23 April 2003 Sunnyvale, CA: Fujitsu Launches MB89210 Series of General-Purpose 8-Bit MCUs
Sunnyvale, CA, April 23, 2003 – Fujitsu Microelectronics America, Inc. (FMA) today introduced two cost-effective 8-bit microcontrollers for automotive body-control module subsystems.
23 April 2003 San Francisco, CA: Fujitsu to Demonstrate New Microcontrollers, IP-Phone, Graphics Controllers, Biometric Sensor ICs
San Francisco, CA, April 23, 2003 – New AccelArray Design Technology and PFU’s Fast-Scan Access in Booth 1916
23 April 2003 Sunnyvale, CA: Fujitsu’ New IP-Phone Chip, Built Around Customized VoiceDSP™
Sunnyvale, CA, April 23, 2003 – SoC, Reference Design Board and Software Deliver Cost-effective, Complete Single-Chip Solution for Carrier Suppliers
23 April 2003 Sunnyvale, CA: Fujitsu’s New AccelArray Technology Delivers Improved Time-to-Market
Sunnyvale, CA, April 23, 2003 – Architecture Resolves Key Design Challenges Competitors Overlook
22 April 2003 Sunnyvale, CA: Fujitsu Delivers Compact Printer Mechanism Series with 200mm-per-second Output
Sunnyvale, CA, April 22, 2003 – Fujitsu Components America, Inc. today introduced a new series of compact thermal printer mechanisms with 200mm-per-second print output speeds. The company also added a high-speed serial and USB interface board to the series in addition to its standard serial and parallel offerings.
15 April 2003 Sunnyvale, CA: Fujitsu Introduces the Industry’s First 16-Bit CAN MCU
Sunnyvale, CA, April 15, 2003 – Fujitsu Microelectronics America, Inc. (FMA) today introduced the industry’s first 16-bit microcontrollers with dual-operation flash memory.
14 April 2003 Sunnyvale, CA: Fujitsu Releases System Packet Interface Level-4 I/O Macro
Sunnyvale, CA, April 14, 2003 – Newest in Series of High-end I/Os for SoC ASICs Joins SFI-4, SFI-5, Transceiver Macros
8 April 2003 Sunnyvale, CA: Fujitsu Introduces Compact All-in-One Printer Unit with USB Interface for Versatile Kiosk Applications
Sunnyvale, CA, April 8, 2003 – Fujitsu Components America, Inc. today released an ultra-high-speed thermal printer subassembly with a high speed serial and USB interface for high-capacity POS, ATM, receipt and ticket dispensing applications. The one-piece unit provides durability and simplifies installation of several components within an end device.
8 April 2003 Sunnyvale, CA: New Compact, Low-Power, Flash-equipped 16-Bit Microcontrollers from Fujitsu
Sunnyvale, CA, April 8, 2003 – A new ultra-compact series of 16-bit flash microcontrollers from Fujitsu Microelectronics America, Inc. (FMA) delivers excellent value for user-interface control systems in handheld appliances and as smart remote controllers or home appliances.
7 April 2003 San Jose and Sunnyvale, CA: Bell Microproducts and Fujitsu Announce New Distribution Agreement
San Jose and Sunnyvale, CA, April 7, 2003 – Bell Microproducts, Inc. (Nasdaq: BELM), a leading value-added provider of high technology products and solutions serving the industrial and commercial markets, today announced a non-exclusive distribution agreement with Fujitsu Microelectronics America, Inc. (FMA), under which Bell Microproducts will distribute FMA’s LCD and plasma products throughout North and South Americas. The Fujitsu display product family includes a wide range of XGA, W-XGA, SXGA and UXGA LCDs ranging in size from 15 inches to 23.1 inches, and 32- and 42-inch high-definition color plasma modules.
7 April 2003 Santa Clara, CA: PFU Systems Extends Plug-N-Run Functionality with Plug-N-Run G2 Introduction
Santa Clara, CA, April 7, 2003 – PFU Systems, Inc., a Fujitsu Company, and a leader in applied information technology and System-On-Module (SOM) components for OEM embedded applications, announced today the Plug-N-Run G2, extending the Plug-N-Run SOM family of products with embedded Ethernet and Sound. The PnR G2 builds on the same architecture as the PnR, keeping electrical and mechanical backward compatibility with the PnR. Thus, OEMs can use the PnR G2 on carrier boards that were designed for PnR modules. The integrated Ethernet, Sound, 3D graphics and ATA100 functions provide OEMs with cost-effective SOM solutions, while maintaining low-power, ruggedness, reliability and well-documented design guidelines, standard for PnR products. The PnR G2 is targeted for the same embedded applications and markets as the company's high-performance PnR products at 400MHz, 500MHz and 700MHz, thus providing OEMs with a smooth transition path to higher integrated PFU Systems SOM products.
31 March 2003 Fairfield, NJ: Fujitsu General America Inc.'s New PLASMAVISION SLIMSCREEN P50XHA10 is Centerpiece of Totally "Future-Ready" Home Installation in Simi Valley, CA
Fairfield, NJ, March 31, 2003 – Precision Audio/Video, a high-end custom installation specialist located in Moorpark, CA, recently completed the installation of a totally "future-ready" home theater system in Simi Valley, featuring Fujitsu's new 50-inch high-definition widescreen (16:9) P50XHA10 Plasmavision SlimScreen® monitor as its focal point. The system, installed in a private residence, makes full use of the monitor's DVI-D digital input with HDCP, which connects to a satellite TV system and HDTV set-top box to provide crystal-clear high definition digital images.
20 March 2003 Sunnyvale, CA: Fujitsu to Deliver a Major Presentation on the 802.16a Standard
Sunnyvale, CA, March 20, 2003 – Fujitsu Microelectronics America, Inc. (FMA), an industry leader in system-on-chip (SoC) technology for the wireless network market, will provide a presentation on the 802.16a standard at the annual Broadband Wireless World Conference at the McEnery Convention Center in San Jose.
5 March 2003 San Jose, CA: Design News Magazine Names Fujitsu's MBF300 Sweep Sensor 2002 Product of the Year
San Jose, CA, March 5, 2003 – Readers Select Fujitsu's Fingerprint Sensor Technology from Seven Finalists
3 March 2003 San Jose, CA: Fujitsu to Move its Headquarters to Corporate Campus in Sunnyvale March 17
San Jose, CA, March 3, 2003 – Fujitsu Microelectronics America, Inc. (FMA) will move its corporate headquarters to 1250 East Arques Avenue, Sunnyvale, from 3545 North First Street, San Jose, on March 17, 2003.
27 February 2003 San Jose, CA: Fujitsu and Sanmina-SCI Establish Strategic Relationship
San Jose, CA, February 27, 2003 – Fujitsu’s Fingerprint Sensor IC Technology Expertise to Combine with Sanmina-SCI’s Design Integration, Global Manufacturing Capabilities
26 February 2003 Fairfield, NJ: Fujitsu General America, Inc. Introduces New Plasmavision Monitors For The Commercial Market
Fairfield, NJ, February 26, 2003 – Fujitsu, the leader in plasma display technology, today announced the introduction of three new widescreen (16:9) Plasmavision SlimScreen monitors designed for the commercial market. The ultimate-performance 50-inch P50XCA11 and 42-inch P42HCA11, and 42-inch P42VCA21 are completely redesigned from previous models to provide improved image quality with higher brightness and contrast, along with a host of useful features that make them ideal for use in commercial installations.
25 February 2003 San Jose, CA: Fujitsu Microelectronics America to Demonstrate New Bluetooth Reference Platform, 14-Bit 800Msa/s DACs, PLL Synthesizers at Wireless Systems Design Conference
San Jose, CA, February 25, 2003 – Wireless SoC Technology, CMOS Sensors and Global Locate’s Assisted GPS Technology Also in Booth 1028
20 February 2003 San Jose, CA: FCSI announces new APD/TIA and PIN/TIA receiver modules
San Jose, CA, February 20, 2003 – Fujitsu Compound Semiconductor, Inc. (FCSI) of San Jose, CA announces new APD / TIA and PIN / TIA receiver modules with integrated Variable Optical Attenuators (VOA) for 10Gb/s Wavelength Division Multiplexing (WDM) applications. The FRM5N144DS and FRM5J144DS have APD or PIN-PD, TIA and MEMS VOA in an industry standard 16 pin butterfly package. The attenuation range of the VOA is 20 dB or more. The overload characteristics have been improved by integrating VOA because VOA controls optical input power level. As a result of this, the receivers have much wider dynamic range (-24 dBm to +6 dBm for APD / TIA and -18 dBm to +10 dBm for PIN / TIA) than current receivers. And these devices are suitable for 10Gb/s WDM applications for linear operation.
20 February 2003 San Jose, CA: FCSI announces new APD/TIA and PIN/TIA receiver modules
San Jose, CA, February 20, 2003 – Fujitsu Compound Semiconductor, Inc. (FCSI) of San Jose, CA announces new APD / TIA and PIN / TIA receiver modules with integrated Variable Optical Attenuators (VOA) for 10Gb/s Wavelength Division Multiplexing (WDM) applications. The FRM5N144DS and FRM5J144DS have APD or PIN-PD, TIA and MEMS VOA in an industry standard 16 pin butterfly package. The attenuation range of the VOA is 20 dB or more. The overload characteristics have been improved by integrating VOA because VOA controls optical input power level. As a result of this, the receivers have much wider dynamic range (-24 dBm to +6 dBm for APD / TIA and -18 dBm to +10 dBm for PIN / TIA) than current receivers. And these devices are suitable for 10Gb/s WDM applications for linear operation.
18 February 2003 Sunnyvale, CA: Miniature 6A Power Relay Has High Sensitivity and High Insulation
Sunnyvale, CA, February 18, 2003 – Fujitsu Components America, Inc. today added to its power relay line a miniature 6A-class device with high-sensitivity properties for industrial and programmable logic controller applications.
17 February 2003 San Jose, CA and Tokyo: Fujitsu, NEC and Toshiba Agree on Common Specifications for “Burst Mode" Pseudo SRAM User Interface
San Jose, CA and Tokyo, February 17, 2003 – Fujitsu Microelectronics America, Inc. (FMA), Fujitsu Limited, NEC Electronics Corporation and Toshiba Corporation announced today that they have reached an agreement on common specifications for Pseudo Static Random Access Memory (PSRAM) devices that feature burst mode function enabling fast access operation. Each of the three companies will independently manufacture and market PSRAM products based on the common specifications, which are to be called Common Specifications for Mobile RAM (COSMORAM), with product introduction expected to begin in the first half of fiscal 2003.
28 January 2003 Sunnyvale, CA: Fujitsu Develops All-Plastic Ferrule for Optical Connectors
Sunnyvale, CA, January 28, 2003 – Fujitsu Component Ltd. (Head Office: Shinagawa-ku, Tokyo; Capital: 2764 Million Yen; President: Tozo Ono] and Fujitsu Laboratory Ltd. [Head Office: Nakahara-ku, Kawasaki City; Capital: 5 Billion Yen; President: Michio Fujisaki] have jointly developed a process for mass-producing inexpensive, all-plastic ferrules with high strength, high durability and optical characteristics equivalent to traditional Zirconia ferrules.
21 January 2003 Kawazaki, Japan: Announcing the Joint Development of a Printed Wiring Board with a New Structure in Partnership with Matsushita Electric Components Co., Limited and Fujitsu Interconnect Technologies, Limited
Kawazaki, Japan, January 21, 2003 – Matsushita Electric Component Co., Limited, President, Koshi Kitadai, (hereinafter referred to as “Matsushita᾿) and Fujitsu Interconnect Technologies Limited, President Yukichi Takeda, (hereinafter referred to as “FICT᾿) have reached an agreement on launching the joint development of a new Printed Wiring Board, which is expected to answer the mounting needs of following generation, by integrating “ALIVH (1)᾿ of Matsushita and “MV-technology (2)᾿ of FICT.
21 January 2003 Sunnyvale, CA: KVM Switch Provides USB Link; Allows Audio and Peripheral Sharing
Sunnyvale, CA, January 21, 2003 – Targeting the small office/home office market, Fujitsu Components America, Inc. today released a 2-port KVM switch with dual functionality for PC control and peripheral sharing. The device conserves desktop space, reduces power consumption, and minimizes equipment requirements.
14 January 2003 San Jose, CA, and Richardson, TX: Fujitsu Delivers Seven New High Performance ASICs to Texas-Based Chiaro Networks
San Jose, CA, and Richardson, TX, January 14, 2003 – FMA, Chiaro Collaboration Moves ASICs from Design to Fabrication in One Year
14 January 2003 Sunnyvale, CA: Fujitsu’s MicroGiGaCN™ Connector Among EDN Magazine’s Top 100 Products of 2002
Sunnyvale, CA, January 14, 2003 – From the thousands of new electronic devices submitted to EDN Magazine, Fujitsu’s matched-impedance MicroGiGaCN™ mezzanine connector ranked as one of the Top 100 products introduced in 2002.
2 January 2003 Fairfield, NJ: Fujitsu General America, Inc. Debuts New 42-Inch P42HHA10 Plasmavision SlimScreen® Display with Upgraded Performance and Features
Fairfield, NJ, January 2, 2003 – Fujitsu, the leader in plasma display technology, today announced the introduction of its next-generation 42-inch widescreen (16:9) Plasmavision SlimScreen monitor, the P42HHA10. The new, redesigned high-definition plasma display features improved picture quality with increased brightness, as well as a wider variety of features including a DVI-D digital input with HDCP.

Top of Page

2009
2008
2007
2006
2005
2004
2003