An innovative, flexible solution for all rack families like PRIMECENTER as well as third-party products. With up to four bays for backup devices, the FibreCAT TXF can be used to simultaneously connect up to four servers. With its wide range of supported backup devices with SCSI, SAS or USB interfaces it is best suited for rack-based servers in which applications are consolidated on a few powerful servers. In short, an economical and scalable solution for the flexible use of your backup capacities.
Front installation of the drives per "warm replace"
High availability through individual switchover of a backup device and replace while system is running
Power switch in the front panel and power management for all interfaces (SCSI, SAS and USB)
Intelligent power management for remote switch on/off of individual drives or the system
LED displays status on the front
Simple monitoring of the system, status LED for all drives and chassis temperature
Serviceability
Replace a drive in the housing without switching off the entire subsystem. Assembly (without tools) of internal components
Technical details
Accessible drive bays
DDS Gen5, 3 MB/s, 36 GB, USB 2.0 DDS Gen6, 6 MB/s, 80 GB, USB 2.0 LTO3HH Ultrium, 60 MB/s, 400 GB, SAS 3Gb/s LTO4HH Ultrium, 120 MB/s, 800 GB, SAS 6Gb/s LTO5HH Ultrium, 140 MB/s, 1500 GB, SAS 6Gb/s RDX Drive, 25 MB/s, 160 GB, 320 GB, 500 GB, 1 TB , USB 2.0 LTO2HH Ultrium, 24 MB/s, 200 GB, SAS 3Gb/s
Active power (max. configuration)
140 W
Weight
15.5 kg (depending on configuration without LW)
Special features
The FibreCAT TXF is an innovative, easy-to-use, flexible and economical rack enclosure for backup devices. With its wide range of supported backup devices with SAS or USB interfaces, it is best suited to consolidate data backups for rack-based servers in PRIMECENTER and third-party racks.
Recommended Service
7x24, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner.
Components
PRIMERGY DAT Streamer DDS Generation 5
The DDS Gen5 tape drive offers transfer rates of 6 MB/s at a compression of 2:1. The DDS Gen5 drive is supplied with USB interfaces. The USB internface is connected without a controller directly to the internal USB port. This version is therefore independent of an additional controller and thus represents a data backup solution that is even less expensive.
PRIMERGY DAT Streamer DDS Generation 6
The DDS Gen6 tape drive is the 6th generation in the well-known and proven DDS tape technology. The drive offers top capacity and performance as well as a reliable and low-priced data backup solution.
PRIMERGY LTO-3 HH Ultrium Tape Drive
With the third generation of the LTO (Linear Tape Open) drive, we are offering an innovative product with adaptive lossless data compression, digital speed matching (DSM) and a 128 MB memory.
PRIMERGY LTO-4HH Ultrium (F3626) V2
The tape drive LTO-4 HH (Linear Tape Open technology) with its 800 GB (1.6 TByte compressed) saves twice as much data as its predecessor LTO-3. It is smaller, saves space and has the same performance and reliability as the LTO-4 full height tape drives.
PRIMERGY LTO-5 HH Ultrium
For the first time, the fifth generation of the Linear Tape Open (LTO-5) tape drive offers uncompressed storage capacity of 1.5 TB per tape and a transfer rate of up to 280 MB/s. With enabled compression up to 3000 GB can be backed up on a single drive.
PRIMERGY RDX
The PRIMERGY RDX (Removable Disk) drive provides professional data backup which everyone can afford. This drive is a new method to backup, archive and transport data. The PRIMERGY RDX drive combines the best features of hard disks and tape drive technology.
PRIMERGY LTO-2 HH Ultrium
With the second generation of the LTO (Linear Tape Open) half-height drive, we are offering a reliable product with dual mode compression, dynamic data rate matching and a 64 MB memory.
Worldwide
