The module has been designed to deal with a complexity of processes while using very little power; it achieves about half of the power consumption (about 5.4mA: actual measured value) and about double the transmission distance at a receiving sensitivity of -94dBm (actual measured value) in comparison to the already very popular Bluetooth v4.1 modules Fujitsu has on the market. The embedded nRF52832 QFN-package SoC has been designed around a 32-bit ARM® Cortex™-M4F CPU with 512kB FLASH and 64kB RAM. Fujitsu accomplished to fit this powerful solution into the small size of just 15.7 x 9.8 x 1.7 mm (same size as the MBH7BLZ02-series).
Integrated are the 32MHz Crystal oscillator and the 32.768kHz Crystal oscillator required for the lowest power and great accuracy. The integration of both Crystal oscillators leaves all the 30 GPIO’s available for the development of great solutions.
NFC™-A tag support is included on chip. Out-of-Band (OOB) pairing using NFC simplifies the process of authenticated pairing between two Bluetooth devices by exchanging authentication information over an NFC link.
The new module is on air compatible with the nRF51-series modules. And, as the FWM7BLZ20 module has the same pad pattern, it is with a few minor changes pin-to-pin compatible with the MBH7BLZ02-series.
FUJITSU Components has a dedicated design team on antenna development able to create that perfect match between module capabilities and proven antenna quality. FUJITSU’s proven antenna capabilities on the MBH7BLZ02 make the FWM7BLZ20 the “most wanted” even before release.
No need to spend time and resources on certifications, the FUJITSU FWM7BLZ20-109049 module will be FCC/IC/CE/Japan radio ACT certified when going into production September 2016. FWM7BLZ20 series is a perfect solution for customers who need to reduce power consumption and/or speed up their Bluetooth applications.
|Bluetooth Technology||Conform to Bluetooth version 4.2 (single mode)|
|Power supply||1.7 to 3.6V DC|
|Peak current||5.4mA (DC/DC mode)|
|Floating amount||±0.5mm in XY directions (guaranteed)|
|Dimensions||15.7 x 9.8 x 1.7 mm|
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Fujitsu Component Limited is under license.
Fujitsu is the leading Japanese information and communication technology (ICT) company offering a full range of technology products, solutions and services. Fujitsu Components Europe B.V. is responsible for managing the sales, marketing and distribution of its relays, touch panels, thermal printer mechanisms, wireless modules and connectors in Europe, Middle East and Africa. The company is headquartered in Hoofddorp, The Netherlands and has representatives all over Europe. For product information, contact Fujitsu via telephone at +31 (0)23 556 0910 or by email: email@example.com. For more information, please visit our website: emea.fujitsu.com/components
Essiena UyttenbroekDiamantlaan 25
Phone: +31 (0)23 556 0936
Company:Fujitsu Components Europe B.V.
Date: 29 July, 2016
Share this page